Jump to content
SAU Community

Recommended Posts

All PArts are for r33 series 2

Location: adelaide

stock intercooler $150

stock injectors and pump $250

stock RB25DET head and cams $1000 (head ready to bolt on and use perfect if you have blown head)-

stock rear wing $300

stock rear bumper $200

stock interior seats front and back $500

rh door trim $100

stock exhaust manifold x2 $100 each

stock inlet plenum $200

stock BOV and piping $100

b&m line lockers $180

v8 oil cooler $150

stock exhaust from dump pipe $400

stock afm $200

buyer pays postage only do bank transfer

Edited by mad34
Link to comment
https://www.sau.com.au/forums/topic/107327-huge-garage-clean-out/
Share on other sites

Hi,

1. What's the best price on the FRONT DRIVER SEAT only?

2. For the FRONT DRIVER SEAT only, what is the courier charge to send the seat to postcode 6149 in Perth, Western Australia?

3. Now, if I take both the FRONT DRIVER SEAT and FRONT PASSENGER SEAT, what would be the best price?

4. Similarly, for both the FRONT DRIVER SEAT and FRONT PASSENGER SEAT, what would be the courier charge to send both seats to postcode 6149 in Perth, Western Australia?

Hope to hear from you with your reply, please e-mail to [email protected].

Much appreciated,

Paul

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...