Jump to content
SAU Community

Recommended Posts

Howdy Gentlemen and Gentleladies...

I've done a search and came up with donuts...

I believe my lifters are on their way oot, I have a particular bad 'tick' @ start-up, but once the oil get's a little warm it tends to go away...!? :confused:

Two questions: 1. Do you have any other alternate ideas of what this may be (as can't really be arsed changing lifters)

2. If not, then does anyone know where I might be able to purchase such a part?

Thank you people...

Edited by Savage Bliss
Link to comment
https://www.sau.com.au/forums/topic/107479-rb20-lifters-on-way-out/
Share on other sites

Howdy Gentlemen and Gentleladies...

I've done a search and came up with donuts...

I believe my lifters are on their way oot, I have a particular bad 'tick' @ start-up, but once the oil get's a little warm it tends to go away...!? :confused:

Two questions: 1. Do you have any other alternate ideas of what this may be (as can't really be arsed changing lifters)

2. If not, then does anyone know where I might be able to purchase such a part?

Thank you people...

When was the last time you changed your oil filter?

I've normally always done a filter change after 10,000 kays (or 2 oil changes) but I noticed when my 33 was nearing the 10,000 mark on it's filter the lifters were tapping increasingly on start up, then would go away. After I changed the oil & filter the noise was gone & haven't had it since. I'm thinking of changing my filter every time I do an oil change now as I don't want to starve my turbo of lube either.

No wonder there are so many rooted Rb engines on this forum.

Turbo oil change is 5000K's or 6 months.

This practice of changing oil at 5000K's and doing the filter every 2nd oil change (10000K's) is absolute madness.

If you want to keep the engine at all healthy, do 2-filters to each oil change.

Filters are cheap as chips and why would anyone in their right mind pump new oil through a dirty filter.

I do my oil changes at 3000-5000 and filters at 2000max.

No wonder there are so many rooted Rb engines on this forum.

Turbo oil change is 5000K's or 6 months.

This practice of changing oil at 5000K's and doing the filter every 2nd oil change (10000K's) is absolute madness.

If you want to keep the engine at all healthy, do 2-filters to each oil change.

Filters are cheap as chips and why would anyone in their right mind pump new oil through a dirty filter.

I do my oil changes at 3000-5000 and filters at 2000max.

I know!! No need to make me feel like sh*t!! :D Oil does get changed on a regular basis, oil filter however I've seemed to neglect the past little while.... Cheers guys...

Well I'll be changing my filter every 5000 klicks with the oil myself, I don't really think there's any point in doing it more often than that. If a filter can't last as long as the regular factory service intervals there's something seriously wrong with your engine already. The majority of crap will build up in the latter half of the 5000 kays anyway when the oil starts to deteriorate.

No worries savage, glad to help.

Edited by Electro

If anything it should be the other way around.

Filter every 5000k oil at 10,000kays.

The oil will last the distance, the filter won't. :S

But do both every 5k. Use a decent mineral oil, there really is no need for a mild rb to run synth unless you really want to.

I run synth because I've thrown 6k at a motor :geek:

yes.. no need to go insane on them..

Add upper engine cleaner into a couple of oil changes, and see if it makes a difference..

Also, what sort of oil you got in there at the moment (do you know?) - maybe its simply a bad match for your particular engine/age.

I'd try these before going sick getting your head reco'ed, etc.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Agreed, I've never seen a 260RS specific manual. As GTSBoy said it will mostly be stagea other than the engine loom https://www.hgeconsulting.com.au/stageaservicemanual.pdf
    • You'lll likely have to make do with R33 GTR for engine/tranny stuff, and Stagea for the body. I don't know that there's even been an actual diagram seen in the wild.
    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
×
×
  • Create New...