Jump to content
SAU Community

Recommended Posts

Dude.. Seriously... I've done a fair bit of shopping around and I really can't go past Lifestyle at Norwest... They took over a $1000 off the retail prices of my system, but the best bit is, they actually give a s**t....

After I had it installed they asked me to come back so they could see the job and have a play with it etc. The Installation wasnt excellent though... i took it back and showed them and they were so persistent to get everything sorted immediately. They were only little things, but everything had to be perfect.

Pop in and see Rodney or Bernie

98942611

I agree, Bernie Makhraz at Norwest is a top bloke, don't bother at Parra Lifestyle, they are tools...I can recommend Greg Liebeck at Fairfield Car Radio also, they have been around for over 20 years and are the best IMHO. If you ask Bill nicely he will give you a demo in his daily driver Astra, the cleanest sounding vehicle I have ever heard.

FRISKI on these forums runs AKIRA Sound on the Hume Hwy Lansvale, I'm sure he will give you a great deal.

Remember you get what you pay for, most places can afford to go to 5-8% on top of cost price, however they do a shit install and you can't trust them...after-sales service is very, very important to me.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...