Jump to content
SAU Community

Recommended Posts

Pulling apart my RB20det to sell as parts...

Still left..

Alternator: $80 (have been told this will also fit RB25 too)

Engine ECU: $50 (auto - will apparently also run manual fine -- get it chipped, la da)

Injectors: $20 each ..

Fuel Pressure Reg (will fit rb25) - $40

RB20/25 Exhaust manifold: $50 SOLD

Crossover pipe and BOV (BOV same as RB25 one) - $50 SOLD

Clutch Fan: $30 SOLD

Intake Plenum inc fuel rail, AAC, etc (minus TB): $50 SOLD

Throttle Body+TPS - SOLD

CAS: $80 SOLD

Ignitor: $120 - SOLD

All were working fine on the car as far as I know. I'm on the goldcoast.

Link to comment
https://www.sau.com.au/forums/topic/107664-rb20det-engine-parts/
Share on other sites

  • 3 weeks later...

is there much difference between the safc you have and the safc2 ?what condition is it in? also if you have pics can you send them to : [email protected]

ill offer $180 for the safc + postage (once i see pics to make sure its in good condition)

Edited by mr_crust

i'm interested in the crossover pipe, also temp sensor if it will fit the rb25det, PM me you contact details, you know i'm on the coast to so should be easy.

cheers, Matt.

Edited by rsx84
  • 2 weeks later...
  • 4 weeks later...

they are series1 injectors.. but I don't believe there is any difference (other than age)

daler.. to be honest probably not.. they are 270cc.. I am not sure what SR20 ones are, but I think they are at least 300cc+

  • 2 weeks later...
  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
    • No, you're wrong, and you've always been wrong about this. The Nismo has 2 sets of openings. One is a real 2-way, and the other is a 1-way. There is no 1.5-way possible with the ramps that they offer. A real 1.5-way does exist. That Cusco stuff I posted is a prime example. If the forward drive ramps are, say 55°, and the overrun ramps are, say, 30°, then you will get about half as much LSD effect on overrun than you do on drive. It is real, it realy works. OK, you're slightly right. The Nismo has 55° and 45° ramps on the 2-way, so it does offer less LSD effect on overrun. But, I think that just means that they've (probably) sensibly established that you do not want actually equal LSD effect on overrun. You just want "quite a lot, but not quite as much as the drive LSD effect".
    • Just wanted to unearth this and post my baby with the new front ❤️😝 Took her to my wedding rehearsal today. Next up is getting wide skirts (after wedding)
×
×
  • Create New...