Jump to content
SAU Community

Recommended Posts

Hey ppl, i got a whole bunch of parts left over and i jus dont want them lyin around my place anymore.

So heres the list :

Electronic front lip + motors - $80 ONO

dscn08868ya.jpg

2 x oil pumps - $30 ONO each

dscn08884or.jpg

standard Front and rear swaybars - $20 ONO for the pair

dscn08938dl.jpg

Rear camber arms - $20 ONO for the pair

dscn08945vx.jpg

Front camber arms - $20 ONO for the pair

dscn08950ph.jpg

2 x 16' Ford AU rims, PCD 114.3 x 5, includes tyres wit 10% tread and 11mm 5 stud spacers - $40 ONO

dscn08998uo.jpg

Prefer melb buyer but will send interstate at buyers expense, im open to any offers. Please email ([email protected]) if u have any queries.

Cheers YogiR33

Thanks to ImageShack for Free Image Hosting

Edited by YogiR33
Link to comment
https://www.sau.com.au/forums/topic/107759-r33-gtst-rb25-parts/
Share on other sites

The front lip, was a dealer option u could get, it fit inside your front bar and wen activated lowers about 5cm under your front bar to reduce the air resistance, good if u do a lot of freeway drivin or plan on makin your car a drag car.

Everything that is availble is still in the thread, the only thing sold was the Nismo key. Prices have been dropped further as this stuff must sell i will keep dropping the prices until it is sold.

Pls PM any offers or if u have any queries.

I'll also be addin 2 other items to the list soon

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...