Jump to content
SAU Community

Pre-purchase Inspection

Mid_Nite_R33

By Mid_Nite_R33,
in Victoria

 Share

Recommended Posts

Modena Grand Master

Modena

Posted
Posted
Hey everyone,

Can anyone recommend a trusted performance work shop that does pre-purchase inspections on japanese performance cars?

Possibbly in SE melbourne area.

Thanks

Good question. I got RACV to do the full test on Line im looking at... the works with hosting the car up etc. *Fingers crossed*

CORBSTR-32 Enthusiast

CORBSTR-32

Posted
Posted

Im actually going to look at a car this week aswell and i was thnkin the exact same thing... where can i get a full inspection of the car done??????

I got RACV to do the full test on Line im looking at... the works with hosting the car up

where did you go for that?

do they have a workshop you can take it to??

how much is this going to set you back??

anyway hope it all goes well for you, goodluck with the car :laugh:

if anyone else knows of a place i'm sure we'd all like to know about it

morgsj50 Community Regular

morgsj50

Posted
Posted

i just went through this, it's a pain in the but. i used racv, the only thing is they wouldnt come out to see it, cos its an import or something, anyways they'll only do a comprehensive check, set me back $215. it can get expensive if they dont pass, the first one i got checked out didnt. if its a black series 2 in the malvern area pm me lol

Modena Grand Master

Modena

Posted
Posted (edited)
Im actually going to look at a car this week aswell and i was thnkin the exact same thing... where can i get a full inspection of the car done??????

where did you go for that?

do they have a workshop you can take it to??

how much is this going to set you back??

anyway hope it all goes well for you, goodluck with the car :/

if anyone else knows of a place i'm sure we'd all like to know about it

Well I booked it so they are doing it tomorrow, then fax the details the next day.

I rang via their direct number and got connected to the department. The car is in Dandenong so they the nearest RACV place is at Cheltenham... the car yard guy has agreed to drive it there on Wednesday... although the car is not complianced yet.

Im an RACV member so it cost me 215... but they should do a major test... host it up etc, for non mbers its closer to 280.

Ill let you know at the end of the week how it all goes.

Edited by Sir-D
morgsj50 Community Regular

morgsj50

Posted
Posted
Well I booked it so they are doing it tomorrow, then fax the details the next day.

I rang via their direct number and got connected to the department. The car is in Dandenong so they the nearest RACV place is at Cheltenham... the car yard guy has agreed to drive it there on Wednesday... although the car is not complianced yet.

Im an RACV member so it cost me 215... but they should do a major test... host it up etc, for non mbers its closer to 280.

Ill let you know at the end of the week how it all goes.

what car yard? power rd? the guys at cheltnam did 2 tests for me, they check everything, even picked up some body repairs that i couldnt see.... plus they'll pick things you might not notice in a test drive

morgsj50 Community Regular

morgsj50

Posted
Posted (edited)
Well I booked it so they are doing it tomorrow, then fax the details the next day.

I rang via their direct number and got connected to the department. The car is in Dandenong so they the nearest RACV place is at Cheltenham... the car yard guy has agreed to drive it there on Wednesday... although the car is not complianced yet.

Im an RACV member so it cost me 215... but they should do a major test... host it up etc, for non mbers its closer to 280.

Ill let you know at the end of the week how it all goes.

i actually went out to pick up the report, that way the guy that did it can discuss it with you and point things out...

good luck...

Edited by morgsj50
Taso84 Mentor

Taso84

Posted
Posted

My old man once bought a car after having it "RACV inspected" and they missed a whole heap of stuff and the car ended up being a lemon. Better to take u car to an import specialist. Theres quite a few in the SE region, kangaroo rd oakleigh is one but there are others that i can remember off the top of my head.

FATGTS-R Experienced

FATGTS-R

Posted
Posted

I had Nizpro do the pre purchase inspection on my car.

Cost was $250 and included a road test, full mechanical and suspension/brake inspection. Body/chassis inspection.

Leak down and compression test along with a power and air/fuel ratio test on the dyno.

I thought it was expensive at the time but after seeing that RACV want over $200 to scratch there heads I guess its a bargain.

Do RACV do a leak down?

Modena Grand Master

Modena

Posted
Posted (edited)
My old man once bought a car after having it "RACV inspected" and they missed a whole heap of stuff and the car ended up being a lemon. Better to take u car to an import specialist. Theres quite a few in the SE region, kangaroo rd oakleigh is one but there are others that i can remember off the top of my head.

I was unable to get my friend mechanic to look at it as he has a workshop in Brunswick but the car is in Dandenong. But after RACV check the car and if they OK it, ill take the car to him and do another inspection to confirm what they said... if anything is dodgy its back to the car yard to fix the problems or money back.

Edited by Sir-D
Taso84 Mentor

Taso84

Posted
Posted
I was unable to get my friend mechanic to look at it as he has a workshop in Brunswick but the car is in Dandenong. But after RACV check the car and if they OK it, ill take the car to him and do another inspection to confirm what they said... if anything is dodgy its back to the car yard to fix the problems or money back.

Thats it, also make sure u do a leak down test, prb the most important one

Modena Grand Master

Modena

Posted
Posted
Thats it, also make sure u do a leak down test, prb the most important one

Well the report came today... there is a need to catalytic converter to be changed (i think its cos of Australian compliance) also the engine has oil leaks which needs immidiate attention according to RACV. I told the car yard and they are meant to fix it up this and next week. I told them unles they fix it Im not getting it. Shoukd I bargain on the price now since theres a few things wrong with it? Also it drifts slightly to the left when driving so wheel balance is needed.

Leak down test is to see what leaks like the oil??

Modena Grand Master

Modena

Posted
Posted
i'd be careful, the car yard is gonna fix it as cheap as they possibly can... depending on what else is wrong, i'd probably be lookin else where, but, at the end of the day it's your money...

Yeah I will have to get it rechecked by RACV again, its like 75 bucks. Also the car has 12 month warranty as long as you service every 6 K and no engine mods.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      RB26DETT Sketchy boost mod?

      By GTSBoy · Posted

      There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • GTSBoy
      Cas issue

      By GTSBoy · Posted

      The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Duncan
      RB26DETT Sketchy boost mod?

      By Duncan · Posted

      Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • nash47
      Cas issue

      By nash47 · Posted

      Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...