Jump to content
SAU Community

Tyres for stock r33 rims


Recommended Posts

Guest andrewjread

Gday all.

Finally got my approval ..YAY!

Has anyone got some tyres with enough tread to pass the pit inspection. New they have quoted me $150-160 a tyre so any price cheaper than that will be good.

Another question is what air filter should I ask the compliance shop to put in. Just a standard one ? or how much more would a brand name one cost.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/10877-tyres-for-stock-r33-rims/
Share on other sites

I have a blitz power sus panel filter if you are interested, I also have a new paper one (was fitted for compliance) you can have the blitz for $70 and the paper one for $10 if you want. As for tyres you need *brand* new tyres on all 4 rims to get it over the pits, so my suggestion is buy some decent ones and then get some new mags and wheels when they are worn. Or if you have plenty of dosh buy some cheap 205/55's (I got some ceat tornado's for $130ish per corner) and then sell the stock rims and get a nice set of japanese deep dish rims alla 18x9" and get some nice dunlop rubber to suit :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
×
×
  • Create New...