Jump to content
SAU Community

Recommended Posts

They just promised so much and I feel that it fell so short. To me there was no sense of teamplay, just some idiots running around trying to get around in a world with crap physics and poor hit detection, but hey, that's just me

Free PC sim :) BMW has got on the simulator bandwagon getting Blimey (GTR2) to make them a game for the release of the new M3

http://www.m3-challenge.com/index.php?id=2&L=0

under downloads section 354Mb

sounds are awesome mmmmm 8250RPM V8

I only have 500Mb of downoad a month... :D

anyone in the city wanna get a CD copy to me? :kiss:

I only have 500Mb of downoad a month... :D

anyone in the city wanna get a CD copy to me? :kiss:

99.9% of ISPs have file servers which wont attract to your 300mb limit

who are you with and we can see what they have got

LOL yep.. I just read SAU, R31skylineclub, ns.com and check emails.... Games/music etc. I usually dont bother.

Today I just signed up with 3 mobile broadband (canning home phone and adam internet) as I can get faster speed on mobile (1.5mbps) than adsl1 at my place for $30 per month. My exchange isn't ADSL2+ compatable as im on a RMX (i think thats it anyway).

Now i get a huge 1gb per month! LOL But I doubt I'll reach that very often.

are you coming tomorrow night?

if you are i will chuck it on a cd for you :w00t:

Well I was SUPPOSED to be coming tomorrow night but now I cant make it :domokun:

Do you work in/near the city at all? If not I will definately be on the cruise on the 30th

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • how do you know voltage is fine?  quick easy test is connect DMM up and put it on max/min mode, remove fuel pump fuse, crank car for 3-5s, go check min voltage You'd be surprised how many "healthy" batteries are showing under 10v during this test in cold weather. 
    • Not properly. You need to be able to dissipate 100 amps or so to doing it meaningfully. You can do it indirectly by watching to see how far the voltage falls during cranking. Unplug the coils or something else to prevent it from starting so you can get a good couple or three chugs. It also helps if you have the multimeter set up reading before you start, and that it has max/min functions. So you can catch the real minimum without having to watch the screen, which often doesn't update fast enough to show the real max/min in dynamic situations. Or use a digital oscilloscope, which can be obtained for <<$100 from Aliexpress (although I'd argue for paying up to ~$200 for a nicer one). A >4 yr old battery will very likely be well down the path to the knackery. Many only last 5-6 years these days. The cold weather lately will definitely make it worse.
    • Hmmm, what do you mean by getting weaker? And where did you get that test done? I've been wondering about my battery because the cold starts crank super slowly. The voltage is fine. Not sure if cranking amps can be checked at home. Battery is 4+ years old.
    • No. The simplest wastegate hookup, with no solenoid or other form of "boost control" (ie, control over your boost control, if you know what I mean) is a single hose, direct from the turbo outlet/hot pipe, straight and only to the wastegate actuator. It is that pressure signal that drives the wastegate to open, providing the boost control (and by "boost control" here, I mean, limiting how high it can go, which is essentially the spring pressure of the actuator). You only end up with tee pieces and alternate flow paths once you start adding things to the boost control system to allow you to determine how much of that boost signal makes it to the actuator. There are so many ways to do that that there is no single way to run the hoses and tees and the like. If you have a stock boost solenoid, then all it does is either allow all the boost signal to go to the actuator, or open up to allow some of it to bleed off. There needs to be a restriction in that bleeder to allow only a small amount to bleed off. And in a stock system, that would then be plumbed back to the turbo inlet (for "emissions control" reasons). That is actually what that nipple on your BOV return pipe could/would be for. If you have an aftermarket boost controller and solenoid, then the above is mostly true, but there is no need for a restrictor in the bleed, because the solenoid is pulse width modulated to create a variable bleed off. The air that escapes from the bleed can either be vented, or also returned to the turbo inlet. For emissions reasons it should be returned to inlet, but the amount of air being vented is so small that it really doesn't matter (either from an emissions perspective, or from an air-fuel ratio affecting perspective).
    • And other times you just need to go buy bigger injectors?
×
×
  • Create New...