Jump to content
SAU Community

Recommended Posts

is there anyway to force a boot from disc without going through the BIOS?

when i turn on my PC i have my 2 drives C & D (either DVD rom or 2nd HD) and can use them both fine. if i do a restart the D Drive disappears.

I have been trying to reformat but when i set the DVD rom as the priority device in the BIOS i loose it when it it exits and restarts.

its really starting to piss me off. I tried to reinstall windows from the desktop but i only have a cd with service pack 1 and my pc has service pack 2 so it won't allow me to install the older one over the top :mellow:

sorry if it is hard to follow i'm not really sure how to explain it

Edited by Whiplash
is there anyway to force a boot from disc without going through the BIOS?

when i turn on my PC i have my 2 drives C & D (either DVD rom or 2nd HD) and can use them both fine. if i do a restart the D Drive disappears.

I have been trying to reformat but when i set the DVD rom as the priority device in the BIOS i loose it when it it exits and restarts.

its really starting to piss me off. I tried to reinstall windows from the desktop but i only have a cd with service pack 1 and my pc has service pack 2 so it won't allow me to install the older one over the top :(

sorry if it is hard to follow i'm not really sure how to explain it

normally F8 will bring up a bios boot selection menu (not actually enteringinto bios, just gives you a choice of what to boot from). If this is a pioneer 112 dvd burner we are talking about, go get it replaced at the store you bought it from... oh also not everyone uses F8 for the boot menu, so you may need to look round at the start of the boot and see if it gives you and hint as to what they could be using

  • 2 weeks later...

just had a go of the new Sega Rally very nice indeed and thats on a old system like mine too a while to load and only has support for keyboard but looks promising but so does the new drfit trailer for need for speed pro street

Sega Rally: Revolution 580mb GameArena DEMO

Sega Rally: Revolution 553mb Internode DEMO

New Trailer showcasing Drift on NFS:PS

NFS:PS Drift GameArena 40mb

THIS IS HIGH RES version of above

NFS:PS Drift Trailer 143mb Internode

Edited by Madaz
  • 2 weeks later...

Can any of you tell me why this is awesome lol...

http://img138.imageshack.us/img138/9763/17102007027mb0.jpg

I get my new ASUS board today... and just as I expected. Fun fun fun...

btw, UT3 is awesome, definitely buying it.

I got MOHA, single player is great, multiplayer less so pre-patch, after 1.1 now its sorta ok, you stand a chance from snipers and sprayers in MOHA but there isnt many Aussie servers so dont buy it for the MP even tho I think its better than COD2's mp, ie less fustrating.

Edited by Pauly33GTS-t

hey chops, I actually have bought the new revision of the p5n32-e-sli board, they are build on the same Striker Extreme motherboard, with the same bios, but less cooling and a few less solid capacitors. Still kicks ass though, enjoying it so far.

CPU: Core 2 Duo E6850 3.0Ghz 4mb L2 cache 3000mhz @ ~3400mhz

Memory: 4095mb DDR2-800

Motherboard: ASUSTeK Computer INC. P5N32-E SLI

Graphics Cards Manufacturer: MSI/Nvidia

Dual NVIDIA GPUs: 2x MSI GeForce 8800GTS-OC Edition cards

Sound: Asus 7.1 Supreme FX add-on card

Hard Drive(s): C:\ (149.0 GB)|D:\ (232.9 GB)|E:\ (111.8 GB)

got parts for a 2nd pc for the wife/kids (just need screen&case)

here's mine, 3DMark06 score of 16692 http://service.futuremark.com/orb/projectd...projectType=14:

Thermaltake Soprano case

Coolermaster Realpower Pro 850w PSU

Asus P5W DH Deluxe motherboard

Coolermaster R120 cpu watercooling kit

Intel Quad Core Q6600 2.4mhz overclocked to 3.3mhz

OCZ 4x 1gb 667mhz overclocked to 732mhz

Seagate 2x 200gb Sata HD in Raid-0 configuration

Seagate 80gb Sata HD backup

ATi Xpertvision 2x 2900XT 512mb pci-e dx10 graphics cards in Crossfire mode

Creative X-Fi Fatality Pro XtremeGamer soundcard

Zalman 5.1 6ch headset & mic, Solman 5.1 6ch sub/speakers

Logitch G5 mouse, G15 keyboard

Cmv 19” LCD screen

LG Dvd-Rw, Sony 1.44 Fdd

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...