Jump to content
SAU Community

Recommended Posts

Hey everyone,

Sorry, but dont really feel like going through the whole thread about which tyres are best and what you rate them.

I'm looking for some new tyres as mine are as bald as a baby's backside and want to get the cheapest best ones around (yes, i know everyone always wants the cheapest and best).

I'm just not sure on the whole tyre size thing... currently i have 235/30/17s on the front and 255/35/17s on the rear. That's how the car came from Japan and really dont know what the go is with upping any of the sizes or ratios.

Fill you in on what i have - 1996 Skyline Series II - has Billstein (however you spell it) suspension and that's about it...

Yes, i am female, hence i'm blabbering on... But a quick answer would be good if someone could help out.

Forking out cash for my Exhaust Manifold Gasket dying right now, so would like to get everything done so my car is 100%.

Thanks.

Catherine.

Link to comment
https://www.sau.com.au/forums/topic/108948-need-to-purchase-tyres/
Share on other sites

How about a budget?

Its really hard to say what is the best cheapest tyre around, because the two tend to be mutually exclusive.

And what are you aiming for in terms of "best"? Maximum grip? Low noise? Long life? Great wet weather performance?

Another option is to try and find slightly used tyres. Some dealerships put new tyres on ex-demonstrators (to seal the deal) and so its possible to get tyres with 80% tread for 50% of the RRP.

I recently picked up a pair of slightly used Bridgestone Potenza RE01s in 245/45 R17 for $350, that still have plenty of meat on them. Not bad considering the brand new 255/45 R17's I bought cost that much each....

Well, that's what i'm trying to figure out, which sort I should go for.

I'm thinking to go for ones that will e great in wet weather - probably semi-comp. I had GIII's on my previous car.

I'm trying not to put a budget on them, just whatever the cheapest I can get some good tyres for.

Would like to start ringing around a few places today and get some quotes. So, any suggestions to which ones would be good?

Ta.

The Goodyear Eagle F1s seem to do well in the wet no matter what car they're on (from Motor and Wheels tests), and I saw them first hand when I had a friend breathing down my neck when we were doing Putty in the rain.

I also drove on Dunlop Sport 3000As, which were a nice progressive tyre. They're a hard rubber compound so there's good life in them, and they squeal as they're approaching the limits so you get plenty of warning if you're corner carving. They were also good in the wet, as I noticed when I was driving up the Hume in a downpour.

If Dunlop was still making the DZ101s I wouldn't hesitate to recommend them. I loved these tyres, and its a shame they were discontinued. Better than the 3000As in every respect, aside from tyre life. Softer compound, more dry weather grip, at least as good wet weather grip if not more. If you find some in stock then they come highly recommended.

Go second hand if you don't really care that much. I just replace my fronts with BridgeStone GIII's 17/40/235 for $30 each with 80% tread. Ring around and you should find something decent second hand.

Those tyres seem a bit small (profile-wise). Most common size is 235/45x17.

Anyway, if you want good advice, have a chat to Craig out at Trackside Tyres in Bayswater, or Andrew at Traction Tyres in Rowville.

If you've been happy with the GIIIs, then stay with them (although I know they aren't cheap). I'm not sure what everyone has against Falken 326s, but I've always found them a quite good general purpose road tyre (they seemed pretty hopeless on the track, but then so did the GIIIs)

Go for the Goodyear Eagle F1's they are relativly cheap, I got mine for $210 each fitted and balanced 235/45/17 (RRP $275 - just ring around till you get a good price).

They grip well in the dry, very well in the rain, excellent wear for a reasonably soft street tyre. Only problem they are not great on the track (especially a dry track) because the tread rolls too much, just take a look at the pattern to work out why - although they are better than similar swept profile treads because the tread is joined in the middle (again look at the tread to see what I mean).

Oh, and BTW, it is worth reading through all 11 pages of that tyre rating thread. Don't be lazy.

post-13881-1141959444.jpg

Thanks for all the help guys.

Yes, i made a mistake with the profile size - they were 235/45/17 front and 255/40/17 rears.

I got myself a set of Pirelli P Zero Rossos for a very good price, then got the whole allignment and balance done straight after and i can definately feel the difference with the stearing wheel not shaking as much.

:geek:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
×
×
  • Create New...