Jump to content
SAU Community

Recommended Posts

Hence why I asked for it :P Anyone know where I can take it to to get the design made into a sticker? I've got the next few days off work so I could get something organised, make up a batch of say 20 or 30 and go from there...

I have found a local business that specialise in printing decals for cars, would just need to get a cost estimate from them and see what they'd recommend whether it be a vinyl sticker, or a transparent sticker etc.

So how about something like this? (the black is emulating the window to show you what the sticker would look like)

sauwide6aj.gif

sautall5cy.gif

i'm getting quotes now. The prices vary alot on sizes and quantity.

First up I'm asking for a price on 100. The wide one i was thinking 200mm and the square one 150mm

reasonable large. Small ones would be alot cheaper.

Biggest problem is someone would have to outlay the $ to get them all printed then sell them all off.

okay. These are quite large. I am not sure if making them smaller would work out cheaper; possibly would but would also be harder to die cut.

wide stickers

Size: Approx 200mm x 40mm

Substrate: Vinyl Computer Cut Stickers

Vinyl: Avery 7 year white vinyl + Avery 7 year red vinyl

Quantity: 100

$264 inc gst

square stickers

Size: Approx 150mm x 145mm

Substrate: Vinyl Computer Cut Stickers

Vinyl: Avery 7 year white vinyl + Avery 7 year red vinyl

Quantity: 100

$352 inc gst

Edited by GFXman

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...