Jump to content
SAU Community

Recommended Posts

Hey Guys,

Just a quick note, I am trying to put together a drag day on behalf of Autotech Engineering in Granville. We are booking out the track on the 14th of May.

As a member of SAU, i would like to extend the invitation to you guys (i know Mintie and prolly Mona will attend) so that we can mix it up a little. So far we have XR6 Turbos, Soarers, STi's, WRX's, 180's, Foresters and more coming along and it would be nice to see a couple of Lines out there strutting there stuff.

More details can be found on:

http://forums.autotechengineering.com.au/i...wtopic=201&st=0

To make it easier for you guys, here are all the details as posted on the above link:

-------------------------------------------------------------------------------------

Hi Guys,

As alot of you know, we have been playing with the idea of organising an Autotech Drag day. Well, finally after plenty of planning and communicating, it is going to happen on MAY 14th, which is a Sunday.

The details are as follows:

* Cost per car - $205 (including lunch and light refreshments - ie soft drinks)

* Pit crew allowed = 2 - $5 entry each

* Spectators allowed = 3 $5 entry each

* Drag racing is between 10 - 4 (lunch break around 1ish)

* Gates open 7 (from memory, I will confirm this)

For this day to go ahead, we will need between 40 to 50 cars. Payment for the track needs to be made approx 1 month before, therefore whoever wants to go MUST PAY IN FULL BY 28TH of MARCH Payment needs to be made at Autotech where you will recieve a recipt saying you have payed. Please leave your Name (or nick on the forum) with them (or send me a PM once you have payed) so that we can keep a list of people who are attending the day. Please do NOT PM me unless you have made your payment as names will only be confirmed once we have the full amount. Names of those who have showed interest will be posted and those who pay will have *Paid* written next to there names.

I must stress guys, the 28th of March is a hard line. If we do not have the numbers by closing of that business day, I will contact John from WSID and cancel the event, so please get your money in ASAP.

A couple further side notes:

* If your car runs quicker then 11.99 you WILL need your ANDRA licence

* If your car runs quicker then 10.99 on the day you will be pulled out for the remainder of the day, as the law requires you to have a roll cage (in which case it was an expensive run - Please note you will NOT be refunded)

* If a pit crew wants to run your car, His/Her name will need to be put down on a seperate list with WSID and they will be charge $100 (WSID rules).

* Due to insurance purposes, you cannot jump in and out of friends cars. All drivers for all cars need to be registered with the officials at WSID before the event.

As far as track rules are concerned, (mainly for those who have not been before) normal Wed night rules apply, ie:

* You will require either a drivers licence or an ANDRA licence

* You will require your rego papers (current)

* If the car is registered in another name, you will need a letter from that person allowing you to race the car on the date. Needs to be signed

* Closed shoes must be worn (no sandles/thongs)

* Long sleeve (t)shirts/pants. No shorts or short sleeve t shirts

* Full face helmet

ADDITIONAL NOTES/ANSWERS TO QUESTIONS

To those of you who have asked questions in the prevoius threads, here are the answers (along with some extra info).

1) The day is limited to 1 driver, 2 crewmembers and 3 guests/spectators per entry however so long as we dont have more then 300 people total (going on the assumption there are 50 cars/drivers) we can add people to each others lists, ie, If for example one of you has 5 people coming already and i have nobody, you can ask to add any additional guests to my list. You yourself cannot have more then the specified number of people (if you guys aren't sure on this, PM me). This will need to be sorted out BEFORE the day, so if you have extras post up closer to the date and see if anybody can take some people on for you. WSID will provide me with 300 tickets which will be distributed to drivers and there crew members/guests. Please try and organise yourselves asap to ensure everything runs smoothly.

2) WSID will only allow cars that are NOT cable of ET's quicker then 11.00 seconds over the quater. Vehicles beyond/quicker then that are classed as Super Sedans and are not permitted. Sorry to those of you who have roll cages etc, unfortunately you will not be able to race on the day.

3) LUNCH IS INCLUDED for everybody which will consist of a bbq and soft drink. PLEASE NOTE....money for all your guest/pitcrew must be collected before your tickets are handed out. This will save confusion on the day.

4) Kids can come and they eat for free. There is a limit of 2 free kid meals per driver and we will need to know prior to the event to organise tickets. Additional kids will need to be paid for as per above (PS, kids are counted as either Pit crew or Spectators).

ADDITIONAL PAYMENT DETAILS:

Autotech has organised funds transfer of payments along with over the counter. If you would like to transfer electronically please refer to the following:

* You can pay your deposits via bank transfer to the following account. Please quote "drag day - insert forum username here" when you transfer the funds.

Account name: Autotech Engineering P/L

BSB: 012 357

Acc No: 107 730 046

Some more Additional Information

Some additional information that I have found out:

1) Motor bikes CAN race, however they are not permitted to race against cars. Same rules apply with a bike, they cannot run faster then 11.00.

2) Gates and scrutineering starts at 8am, racing at 10.

I am still in discussions as to what happens if the day is a wash out (rain). I will update you guys as soon as i know (should be tomorrow)

I think this pretty much covers everything, if anybody has any questions feel free to ask.

Regz

Dean

----------------------------------------------------------------------------------------------------------------

It will be nice to see a few of you out there,

Regards,

Dean

Interested SAU Members (Red = Confimed/Paid) -

1) Moanie

2) Silver GTS-T

3) Nath95 + 2 p/c, 3 spec

4) NXTIME

5) Sindows

6) Shonen

7) ido09s

Edited by Mr 350Z
Link to comment
https://www.sau.com.au/forums/topic/109242-autotech-drag-day/
Share on other sites

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

Hi Thomas,

Payment for the drag day needs to be made by the 28th of this month. There is still room so as long as you get it in by then you should be ok.

I can add your name, just confirm when payment is made......however if we fill up then i have to give preference to those who have there money ready.

The link above should be working and you can find all the banking details on the site.

Hey Mona, LOL nah, i dont think I will be any competition for you....12.5, i have no chance :).

You can run Master G in his Silver Service Taxi.....LOL, his car should be ready and out on the track that day :(

Silver gts-t - Name has been added to the list, Autotech will confirm when payment goes through and then ill secure your spot (same for you Mona).

How are we looking here guys, do we have anybody else thats interested in a Drag Day.

It should be an awsome event with a number of cars, as mentioned XR6 Turbos, STi's, Soarers, should be a Transam......Will be a good day to meet some fellow car buddies and do some legal racing.

I hope to see a number of you attend, it would be nice to see a few of you ladies sign up along with Mona as its not often that I see girls attend events like this.......Kick some Guy ass girls :) ....... Or vice versa if its Mona racing :(

PM me or post up if you guys have any questions,

Regards,

Dean

Edited by Mr 350Z
Okies.. jsut transferred the monies!! let me know when you guys receive it! :)

and do we need to pay for spectators now? I have no idea who would like to come along!

Thanks for the quick payment Mona.

As for spectators, that can be organised closer to the day when we start organising food etc. Ill let you know when we need numbers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I can ship Nismo floor mats to you: https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34?_pos=1&_sid=9278c1467&_ss=r  
    • Here's the link: https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6642/misc/G49?frame_no=WGNC34-137122 What you think about it? The same product i found on nengun: https://www.nengun.com/oem/parts/40567/MiPwn5qAMfCfmpxHNDnwn5q9MDAx8J-QiW9sZC1qcC0xMTAtRzQ5LS0wMDE/Floor+Carpet+%2F+Mat+2/0688339eba149c19 Bot i have spoken to 😅 ensured me, that mats are 100% original, oem product. I have my doubts. I also heard what you mentioned, that nengun often offers items that are actual not available... On the other hand mats i found on japanese yahoo or ebay are in poor condition and still quite expensive so i'd rather wait for some better offers. My location - Poland. We literaly don't have ANY market for used Stagea parts so need to search outside Europe.
    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
×
×
  • Create New...