Jump to content
SAU Community

Recommended Posts

For Sale: Complete RB25 package, mostly new, purchased for use in a R32 racing car, which due to rule changes is no longer allowed to run this set-up.

RB25 Neo Engine- From R34, VVT. Comes with GTR Rods and a brand new set of Ross Forged Pistons, rings and metal gasket. (Pic attached) All still in the box. Engine ready to be re-assembled, have left apart so buyer can further modify if desired. Good for a conservative and reliable 330kw at the wheels as is. $2,500

RB25 Gearbox- (pic attached) Brand new, never seen oil. Comes complete with brand new shifter still in the plastic. $2,600 for both

OS Geiken Clutch- (pic attached) Brand new still in the box. Twin Plate 450hp. Complete with bearing kit. $2,000

RB25 Apexi- (pic attached) Brand new still in the box with hand controller. $1,200

RB25 Wiring Harness- R34 VVT harness complete. $500

Everything is quality, purchased to put in to a State Series winning and reliable race car. (Finished all of its last 66 race starts dating back 3 years!) No dreamers please, all prices are under retail.

Everything is there to either upgrade a R32 GTS-t to be an awesome machine that will eat all but the best GTR's or hot up a R33 or R34.

Would prefer to sell as a complete package to a single buyer or group and will sell the lot for $7,500 ($8,800 is individual total). Retail for this package is around $10,500 to $11,000!!

Cheers

26Motorsport

post-20112-1142426823.jpg

post-20112-1142426924.jpg

post-20112-1142427300.jpg

post-20112-1142426995.jpg

post-20112-1142426959.jpg

Link to comment
https://www.sau.com.au/forums/topic/109793-complete-rb25-engine-package/
Share on other sites

  • 1 year later...
For Sale: Complete RB25 package, mostly new, purchased for use in a R32 racing car, which due to rule changes is no longer allowed to run this set-up.

RB25 Neo Engine- From R34, VVT. Comes with GTR Rods and a brand new set of Ross Forged Pistons, rings and metal gasket. (Pic attached) All still in the box. Engine ready to be re-assembled, have left apart so buyer can further modify if desired. Good for a conservative and reliable 330kw at the wheels as is. $2,500

RB25 Gearbox- (pic attached) Brand new, never seen oil. Comes complete with brand new shifter still in the plastic. $2,600 for both

OS Geiken Clutch- (pic attached) Brand new still in the box. Twin Plate 450hp. Complete with bearing kit. $2,000

RB25 Apexi- (pic attached) Brand new still in the box with hand controller. $1,200

RB25 Wiring Harness- R34 VVT harness complete. $500

Everything is quality, purchased to put in to a State Series winning and reliable race car. (Finished all of its last 66 race starts dating back 3 years!) No dreamers please, all prices are under retail.

Everything is there to either upgrade a R32 GTS-t to be an awesome machine that will eat all but the best GTR's or hot up a R33 or R34.

Would prefer to sell as a complete package to a single buyer or group and will sell the lot for $7,500 ($8,800 is individual total). Retail for this package is around $10,500 to $11,000!!

Cheers

26Motorsport

post-20112-1142426823.jpg

post-20112-1142426924.jpg

post-20112-1142427300.jpg

post-20112-1142426995.jpg

post-20112-1142426959.jpg

  • 1 month later...
  • 3 months later...
Will the pistons suit a R33 RB25DET?
Yes they will and they are still sitting in a box brand new in my garage. Let me know if your interested

Cheers

Mark

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
    • Oh, you are right. But, in Australia E10 is based on 91RON fuel and ends up being 94RON. Hence it being the cheaper option for economy cars. The more performance oriented cars go for the 98RON fuel that has no ethanol mixed in. The only step up we have left then at some petrol stations is E85.
    • There is a warning that "this thread is super old" but they ignore that anyway...
    • With 10% Ethanol, we're talking 2-3% fuel consumption difference. The emissions reductions and octane boost in my opinion far outweigh this almost non existent loss.    My tanks sitting at 80%. Luckily that should go down fast as I'm on vacation again for the next two weeks. 
×
×
  • Create New...