Jump to content
SAU Community

Recommended Posts

Hi all

I have a 34 GTT and was wondering when the radiator fan (the one that blows onto the radiator) is supposed to be on?

Is it supposed to be always on?

In the morning I drive it to work (5 mins away) and never see it come on, is this strange?

My oil and water temps all seem normal.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/109808-radiator-fan/
Share on other sites

Theres the black fan on the right side of the engine bay, and then there is the big white fan that blows onto the motor.

I am talking about the smaller black fan thats pushes air through the radiator. Dont know whether this is the aircon fan? So many fans I am confused! haha

Link to comment
https://www.sau.com.au/forums/topic/109808-radiator-fan/#findComment-2023158
Share on other sites

Had you done a search, you would have found .....

I have done a search and found 30 pages of crap.

And on some threads, people are saying it comes on when the car is on, others when the temp reaches X degrees.

I found your post as per below:

"The A/C fan is controlled by the thermatic switch in the bottom tank of the radiator. It only activates when the coolant temp gets too high. Under normal circumstances, the standard engine fan is able to maintain sufficient airflow to keep the A/C radiator cool.

However, if you have the A/C re-gassed with the modern stuff (R134a ?), get the fan re-wired to come on with the A/C."

Is the A/C fan the one that blows onto the radiator? If so then mine does not turn on when the air con turned on during a cold start (I hear something else click and sound like a fan though when the A/C is on, I think thats the compressor)

How hot does everything have to get before its turned on, even short 10 minute drives and it doesnt come on. I should really take it for a thrash and find out.

Edited by nuffsaid
Link to comment
https://www.sau.com.au/forums/topic/109808-radiator-fan/#findComment-2023196
Share on other sites

It only activates when the coolant temp gets too high....
ie, when the engine starts to overheat with the A/C on. The 'switch-on' point of the switch is a few degrees above the thermostatted temp of the engine.

As I said in the post of mine that you found, the standard engine fan is usually capable of pulling enough air through the A/C radiator to control its temperature.

Link to comment
https://www.sau.com.au/forums/topic/109808-radiator-fan/#findComment-2023264
Share on other sites

Oh so even if the water temp guage is sitting halfway, it doesnt mean it should come on?

But say the air conditioning is on, and its a warm day and the car has been driven around for a bit, you'd expect it to be on right?

And when you are referring to the engine fan? thats the big one in the middle right? then where is this a/c radiator?

Link to comment
https://www.sau.com.au/forums/topic/109808-radiator-fan/#findComment-2023278
Share on other sites

Oh so even if the water temp guage is sitting halfway, it doesnt mean it should come on?
Right.
But say the air conditioning is on, and its a warm day and the car has been driven around for a bit, you'd expect it to be on right?
Not necessarily. If the engine isn't overheating under the load of running the A/C in the hot weather, then the fan won't come on.
And when you are referring to the engine fan? thats the big one in the middle right?
Yes, the one attached to the front of the engine.
then where is this a/c radiator?
It's the silvery one, out front; the one with the A/C fan bolted to it.
Link to comment
https://www.sau.com.au/forums/topic/109808-radiator-fan/#findComment-2024515
Share on other sites

Most of the points above I understand.

However, now I have to clarify:

are there 2 fans only, the engine and the A/C?

so the one I am referring to must be the A/C fan?

then why is this fan blowing directly onto a black radiator (the main big one) and not the A/C radiator which I now have to go and find somewhere. hahah

Link to comment
https://www.sau.com.au/forums/topic/109808-radiator-fan/#findComment-2024557
Share on other sites

Most of the points above I understand.

However, now I have to clarify:

are there 2 fans only, the engine and the A/C?

so the one I am referring to must be the A/C fan?

then why is this fan blowing directly onto a black radiator (the main big one) and not the A/C radiator which I now have to go and find somewhere. hahah

Maybe someone painted it. If your A/C works, then you have an A/C radiator in front of the main radiator.

Link to comment
https://www.sau.com.au/forums/topic/109808-radiator-fan/#findComment-2026464
Share on other sites

A/C definately works, especially when the car is parked under shade on a hot day.

However if the car has been out in the sun all day on a hot day, it doesnt work as well, but thats normal I think, all this black interior in the car doesnt help on sunny days! hahah

I also noticed that even at night, the cabin of the car can get a little warm, is this normal for skylines? they seem to make alot of heat. you can feel warm air coming through the air vents sometimes (heater is not on)

Link to comment
https://www.sau.com.au/forums/topic/109808-radiator-fan/#findComment-2026499
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can u check this way it works for power supply?
    • These coils draw 10amps that what i read online
    • I appreciate the detailed explanation, think I understand now. I spent the better part of last night reading what I could about shuffle and potential solutions. I had replaced the OEM twin turbo pipe with an alternate Y pipe that is separated further away from the turbo. The current one is from HKS and I had a previous pipe that was separated even further away, both have shuffle. I had heard that a divider can be welded in to the OEM pipe to remove turbulence, and figure that aftermarket pipes that are more separated would achieve the same thing. From what I read, most people with -10 turbos get shuffle due to their size, though it's a bit less common with -5s on a standard RB26. I think Nismoid mentioned somewhere it's because OEM recirculation piping is common in Australia with -5 cars. It seems that the recommendation tends to vary between a few options, which I've ordered in what I think is most feasible for me:  1. Retune the MAP or boost controller to try to eliminate shuffle 2. Install OEM recirculation piping 3. Something called a 'balance pipe' welded onto the exhaust manifolds. I don't know if kits for this are available, seems like pure fabrication work 4. simply go single turbo My current layout is as follows: Garrett 2860 -5s HKS Racing Suction intake MAF delete pipes HKS racing chamber intake piping hard intercooler piping,  ARC intercooler HKS SSQV BOV and pipe Haltech 2500 elite ECU and boost solenoid/controller HPI dump pipes OEM exhaust manifolds HKS VCAM step 1 and supporting head modifications Built 2.6 bottom end All OEM recirculation piping was removed, relevant areas sealed off I'll keep an eye out for any alternative solutions but can get started with this.  Only other question is, does shuffle harm the turbo (or anything else)? It seems like some people say your turbo shafts will explode because of the opposing forces after a while and others say they just live with it and adjust their pedal foot accordingly. 
    • That worked out PERFECTLY! Thank you big time to JJ. He was able to swap me his stock diff. He drove all the way to me as well. Killer! Removal & install was pretty straightforward. The diff itself is HEAVY. So that’s a 2 man job.  Man does the car drive nice now! Couldn’t have worked out any better 👌
×
×
  • Create New...