Jump to content
SAU Community

Recommended Posts

I am a 95 GTSt R33 this needs to urgently be off loaded see the specks below the turbo needs new bearings otherwise it is in perfect condition:

number plate: TFIRD "DRIFT BACKWARDS"

VIN: 6T91MPAAAS1XFK004

EN: RB25137177A

The car is good for 500 Hp and over 800nm of torqe > it has just done 1000km since it was rebuilt with new motor and forged Aries pistons, new triple plate OS Gekin clutch bigger injectors fuel pump, drift king height adjuster coil over suspension one schock needs replacing adjustable camber rods strut brace big front mount cooler 700+ hp high mount turbo Apexi exhaust manifold full 3inch+ HKS super dragster exhaust system, Apexi external waste gate in to 2.5 inch screamer pipe, big apexi engin oil cooler kit. Eboost controller and Modified computer lots of gauges and sick body kit and 3 piece rims! Turbo timer and alarm a good looking cars demands respect the Apexi R6 modified turbo needs bearings also comes with spare S2 bottom end

a Crazy $12,500 the parts on the would be worth more but time is of the essance here so please snap this up quickly.

Call Jeff on 03 51766210 or email [email protected]

post-22553-1142478487.jpg

post-22553-1142478533.jpg

Edited by jmcdonald

hey there, very interested! could i get some more pics from the rear of the car? anything wrong with the car at all? what kit is on the car?

Very interested!!

cheers bud

EDIT: SENT YOU A PM BUD. LOOKING FORWARD TO HEARING FROM YOU

Edited by Slawta

There is nothing shoddy about it that is why all the details are there and people are more than welcome to view the car, there just needs to be a quick sale so this is one of those mad deals your mates get but you can never find so hurry up and jump on it!

is the apexi r6 onb the floor???? do you know how much bearings can be bought for to replace them? is it able to be drivin around as we speak? would like to come and look at something running. cheers bud

i pmed you btw

rick

No that is not the apexi on the floor that is anther turbo the car can be started if I throw it on the batt charger no problem I also have a little pipe made up so I move the car around which connects to the exhaugst if needed I could put that on. The bearings are around the $1000 mark and have to come from apexi there are no after market ones unfortunatly

  • 2 weeks later...

I see this is still for sale, I have checked out the car guys and it is "okay". The interior dash was in bits, no big deal but would have liked to see it in one piece. The paint work is very poor so it will need a re-spray, nothing like in the pics, body kit is fooked. Engine bay looks average at best, as does the boot. One of the shocks is rooted, not sure how good the rest are. There is no road worthy but Jeff said he can get one if need be. The front head lights are also pretty much fooked along with one of the tail lights.

Bottom line is for the price its pretty good, providing the engine is all its cracked up to be and the gearbox works well. Spend another $5K on this car and you would have something pretty respectful. The Apexi turbo aint worth fixing from what Ben at race pace said so if you want to make all the power that the car is supposed to be capable of a good turbo is going to cost at least $2K. Anyway good luck with the sale, hope these extra details helps you with the sale. From the pics the car looks killer, in the flesh its not, but you get what you pay for and at $12K it’s a pretty good buy.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • neither stumble or cut really seem to be an appropriate term....hard to explain its like a rev limiter but at 4k, but it violently shakes engine and entire vehicle as the rpms will not rise over 4k, even with slow acceleration. as soon as it hits 4k, it sounds like entire spark is lost entirely. plugs were 1.1 which I used as such, but later put in new plugs gapped down to .8 changed back after issue arose when I replaced the coils, still does it with either plug gap...damn and it was all running so good.
    • Oh how times have changed! I actually lean it out relative to my water/methanol injector duty cycle. The methanol adds a lot of fueling and you can then lean it out even more due to reduced knock. 
    • Yeah my thoughts are the same, a well thought out WMI setup, would be slightly ahead of just straight E85 and you're also chemically intercooling the charged air, dropping it even further. This is why you need to add so much more fuel as soon as you spray. I remember someone taking me through their set up before (Dennis, has a R33, lives around Cabramatta - no idea if he's still around on this forum). He would target AFR 10:1 on 98, then as WMI ramped on, AFR would lean back up to 11:1. Amazingly, he did this all through his PowerFC, a relay to cut power to his EBC solenoid if there was not enough line pressure on his WMI kit. And of course, if there wasn't any boost made above gate pressure, you wouldn't be accessing the load cells with heaps of timing for WMI. One downside to that rudimentary setup, once the WMI came on, the EBC would unleash the dragon, and of course all the timing. Tyres would fry lol.
    • Shimmed or shimless, still solid, no hydraulic pump up stuff.
    • They have said food will be limited. Mainly meat pies and sausage rolls from memory. But they have a coffee van!
×
×
  • Create New...