Jump to content
SAU Community

My Taxi

kinggts25

By kinggts25,
in Four Door Family & Wagoneers

 Share

Recommended Posts

kinggts25 Contributor

kinggts25

Posted
Posted

Hi Guys,

Just thought since this seems to be the most active cefiro/laurel forum i can find i would post some pics of my build up :D brought a 1989 cefiro manual rb20e ghetto spec...240kms on her....have since....sanded it back made her smooth and painted her :D (all in my garage) and installed the rb20det ;) etc done pretty well so far including the cost of the car i have only spent $2000.... but i have coilovers,intercooler, and 5 stud conversion to go..go some nice 17 inch tanabe 3 piece rims to go on her :)

paint.jpg

Link to comment
https://www.sau.com.au/forums/topic/109871-my-taxi/
Share on other sites
S13Deviat Grand Master

S13Deviat

Posted
Posted

kinggts25 - Mate i would love to pick ur brains about the sanding back and respray! I am about to do the exact thing to mine and have never done it before....

Any chance of a write up of how to, what tools, products used & recommend!!! :D PLZ PLZ PLZ :D

Ie. what did u use to sand her back?? Primer... spraying techniques etc as it looks like a sweet job from that pic....

Ando

Link to comment
https://www.sau.com.au/forums/topic/109871-my-taxi/#findComment-2024503
Share on other sites
kinggts25 Contributor

kinggts25

Posted
  • Author
Posted
how hard was the engine swap to do?

Took about an hour to get the old engine out etc...just used a beam in my garage and a block an tackle :) and about 25 minutes to get the new engine in....the most time consuming part was the wiring which was just pissing around etc...if you have an rb20DE ceffy it wouldnt be a prob though :P it's pretty easy....and the only other mechanical thing i have done on a car is change a diff :) this website is very good ;)http://www.geocities.com/lowrider_c33/

Link to comment
https://www.sau.com.au/forums/topic/109871-my-taxi/#findComment-2026359
Share on other sites
kinggts25 Contributor

kinggts25

Posted
  • Author
Posted
kinggts25 - Mate i would love to pick ur brains about the sanding back and respray! I am about to do the exact thing to mine and have never done it before....

Any chance of a write up of how to, what tools, products used & recommend!!! :) PLZ PLZ PLZ :P

Ie. what did u use to sand her back?? Primer... spraying techniques etc as it looks like a sweet job from that pic....

Ando

;) yeah man if you have msn skylinegt25 (at) hotmail.com...pretty much i used real basic equipment i just spent ages on the prep which gets pretty depresseing... cleaned the car, sanded the body with 120 grit to chew thru the clear coat then sanded with 400 grit before applying the 1k etech primer...think i ended up with about 3 -4 coats of this after applying a lil body filler to smooth out some ripples and get rid of the aerial :) after that i left it for about 48 hours to fully dry etc again, then wet sanded it with 400 grit and then to 600/800 grit (the can only said 400 but i wanted smoother lol)...wash the car reaaaally well...make sure its dry...then just before painting use a wax/grease remover (prepsol or similar)...then ur ready to spray base coat...did 4 coats of this...leave for a good period of time and then wet sand this back with 1500 then 2000...then its time for the buffing....which is a mission...haha get a machine....

Basically follow the instructions on the can for times between coats etc...all the equipment i used was very cheap...

Compressor from bunnings $150

Gravity Feed Spray gun $60 (from trademe)

primer $70

Thinners $ 50

Paint (acrylic lacquer) $270

lots of drop coats for covering stuff u dont want overspray on!! $40

sandpaper etc like $30

and lots of masking tape lol get good stuff....proper painters stuff if you use the normal crap it wont pull of cleanly and takes an AGE to scrape the left overs off...

Link to comment
https://www.sau.com.au/forums/topic/109871-my-taxi/#findComment-2026366
Share on other sites
S13Deviat Grand Master

S13Deviat

Posted
Posted

Mate ur a legend!!! Thanks a million, appreciate the write up! Will be starting the first sand back hopefully this weekend....

1 quick question.... i assume u did the sanding by hand? Sand paper wrapped around something? Or just a good ole piece of sandpaper and i sh*t load of elbow grease?

Cheers again dude!

Ando

Link to comment
https://www.sau.com.au/forums/topic/109871-my-taxi/#findComment-2026378
Share on other sites
kinggts25 Contributor

kinggts25

Posted
  • Author
Posted
WEAR A RESPIRATOR !!

Best thing I bought when I painted my kit. Did the primer on saturdy with one of those white paper masks and was soo f*kn high by the end I walked around dazed for about 10minutes :)

yeah forgot to mention that!! get a GOOD one! when buying the paint get a spec sheet it will tell you which filters to use! i work for a safety equip supplier so i got mine for about $14 they are the best investment ever!!! also good when sanding bog/fibreglass etc :P any thing like that....buy one or u will die.....my garage was soooo full of fumes and shit.... :huh:

Link to comment
https://www.sau.com.au/forums/topic/109871-my-taxi/#findComment-2026425
Share on other sites
  • 2 months later...
  • 2 weeks later...
inark Grand Master

inark

Posted
Posted

one of the things i hated about being a panel basher :D all the bloody dust and fumes.

no wonder i cough so much now.

looks good mate... now i have a garage to work in im going to be doing something similar to my car... pity its a VL lol

Link to comment
https://www.sau.com.au/forums/topic/109871-my-taxi/#findComment-2240784
Share on other sites
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      M35 Aftermarket Fuel Pump

      By Dose Pipe Sutututu · Posted

      Yeah, I don't believe the M35 uses a deadhead system.
    • GTSBoy
      M35 Aftermarket Fuel Pump

      By GTSBoy · Posted

      Have you done your thinking backwards? 3 bar, 43.5 psi pressure drop being the presumed specification for an injector, means you need 3 bar upstream when they are firing into atmospheric pressure, and more upstream pressure than that when on boost (you add your boost to your rail pressure to maintain 3 bar across the injector) and you need..... less pressure upstream when you have vacuum in the manifold. So, presuming that you're idling at -10 psi, then you only need ~23 psi in the rail. I realise that I did not need to say all of that to you specifically Matt, once you'd realised your mistake. It's mostly there for complete clarity for others.
    • Dose Pipe Sutututu
      RB25 Drama's

      By Dose Pipe Sutututu · Posted

      Have you reached out to the guys at Spool Imports? They are a Ross dealer, I can imagine they would have the rings just sitting on the shelf (I could be wrong).  
    • GTSBoy
      Back for more after 18 years - and where are the longnose R200 LSDs?

      By GTSBoy · Posted

      There's one for sale at Grand Auto Wreckers in Lonsdale (SA), for .... let's suggest the sum they're asking for will make you cry. You may have to embrace the idea of modifying the rear subframe to accept some other diff. You could probably find a way to wangle a shortnose into there, with a custom rear adapter and some sort of shenanigans to relocate the front mounts. This has probably already been done by others, so there might be some guidance available as to how easy/impossible it is, out there in the googles. But you possibly needn't restrict yourself to Nissan diffs if you're going to contemplate that. There are similarish Toyota diffs, possibly some Euro ones, possibly some Seppo ones.
    • Duncan
      G35 Control arm and Compression Rods into a V35 Skyline.

      By Duncan · Posted

      The ball joint taper and arm taper have to match angle and diameter, but just doing the bushes is a much better option.....seems like the industry moved to "it is cheaper to replace the whole arm than take on the labour for changing this bushes", glad the aftermarket supports it
×
×
  • Create New...