Jump to content
SAU Community

Recommended Posts

help need to find someone who has contacts with nengun or someone who has an accound with someone who can get me a turbo kit from japan or australia for my rx8, ive been looking at modyourcars website and they have the kit for $7500 recently bumped up from $5900, but nengun has the same kit for 4500 delivered, please if anyone can help be much appreciated, dont feel like handing over 4500 to someone in japan not knowing if i will get my kit.

Link to comment
https://www.sau.com.au/forums/topic/109900-need-help/
Share on other sites

I recommend using Perfect Run

Website is www.perfectrun.com.au

I've bought plenty of gear from him, and so have people I know. Never been a problem, not even once. However, you might have to pay some customs tax on it when it turns up. But you'll still save heaps.

He has the greddy turbo kit for around AU$4300 + shipping:

http://www.perfectrun.com.au/performance%2...ddyturbokit.htm

Checky-checky check it out!

Link to comment
https://www.sau.com.au/forums/topic/109900-need-help/#findComment-2028100
Share on other sites

Why not check out some Ausie kits going around, you might pay a little more, but the quality of the kits are very good and you have the added bonus of local warranty etc.

Example this is taken from Rotor Master (I know its a supercharger, but its still good).

http://www.rotormaster.com.au/subPage.asp?cid=50

Specifications:

> Coolest charge air temperatures for maximum power and engine reliability

> Highly efficient C2 ProCharger

> Rigid 6061 T-6 CNC machined brackets

> Patented self-contained technology eliminates need to punch a hole in your oil pan

> Patented friction reduction drive for least parasitic load and greatest durability

> Helixed 7071 T-6 billet impeller

> Highly effective and high flowing DNA Motorsport air-to-air intercooler system for easy installation

> PowerMod - ProSequential advanced engine management system

> Complete bolt-on system

> No bodywork cutting required

> OEM fit and finish

> Factory smooth driveability for daily use

Priced at AUS $11,900 in boxed form (ready to install) the SuperCharger kit is modest value with a 200+ kW rear wheel result with a standard exhaust system ensuring noise maintained at an appropriate level.

There are two turbo kits available on this website:

http://www.turbo-kits.com/rx-8_turbo_kits.html

Plus other accesories available if going the turbo route.

I was reading about another one recently in a magazine, i'm pretty sure it was Zoom, it was also an Australian kit. I thought it was ASE but I checked their website and it wasn't them?

Link to comment
https://www.sau.com.au/forums/topic/109900-need-help/#findComment-2028446
Share on other sites

Why not check out some Ausie kits going around, you might pay a little more, but the quality of the kits are very good and you have the added bonus of local warranty etc.

Example this is taken from Rotor Master (I know its a supercharger, but its still good).

http://www.rotormaster.com.au/subPage.asp?cid=50

Specifications:

> Coolest charge air temperatures for maximum power and engine reliability

> Highly efficient C2 ProCharger

> Rigid 6061 T-6 CNC machined brackets

> Patented self-contained technology eliminates need to punch a hole in your oil pan

> Patented friction reduction drive for least parasitic load and greatest durability

> Helixed 7071 T-6 billet impeller

> Highly effective and high flowing DNA Motorsport air-to-air intercooler system for easy installation

> PowerMod - ProSequential advanced engine management system

> Complete bolt-on system

> No bodywork cutting required

> OEM fit and finish

> Factory smooth driveability for daily use

Priced at AUS $11,900 in boxed form (ready to install) the SuperCharger kit is modest value with a 200+ kW rear wheel result with a standard exhaust system ensuring noise maintained at an appropriate level.

There are two turbo kits available on this website:

http://www.turbo-kits.com/rx-8_turbo_kits.html

Plus other accesories available if going the turbo route.

I was reading about another one recently in a magazine, i'm pretty sure it was Zoom, it was also an Australian kit. I thought it was ASE but I checked their website and it wasn't them?

do you think 12k is worth 200rwkw, i dont think so

Link to comment
https://www.sau.com.au/forums/topic/109900-need-help/#findComment-2028597
Share on other sites

what you looked at was for a supercharger kit, they are known to be expensive.

look at the turbo kit

http://www.turbo-kits.com/rx-8_turbo_kits.html

theres one for $4K suppose to be 260rwhp

that power figure is only on 5.6psi, i spoke to c and v the other day and they gaurentee it will make much better power at 10psi daily driver, over 350, i dont care im gonna risk it, if anything i would be a crayy tyre fryer

Link to comment
https://www.sau.com.au/forums/topic/109900-need-help/#findComment-2028929
Share on other sites

I recommend using Perfect Run

Website is www.perfectrun.com.au

I've bought plenty of gear from him, and so have people I know. Never been a problem, not even once. However, you might have to pay some customs tax on it when it turns up. But you'll still save heaps.

He has the greddy turbo kit for around AU$4300 + shipping:

http://www.perfectrun.com.au/performance%2...ddyturbokit.htm

Checky-checky check it out!

i second this guy. perfect run have prices as good if not better then nengun and greenline. there service is better then both, i have dealt with all 3... and the best part of it is..... THEY HAVE A SHOP IN SYDNEY !

so give them a visit and pay in person if you wish :(

i would get one but they dont speak english and the only way to contact them is by email, bit sus to me

wrong, see what i said above ! go see them in person if your real worried..

Link to comment
https://www.sau.com.au/forums/topic/109900-need-help/#findComment-2030898
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW )
    • But seriously, can we ask for the results of the "tip a bottle of metho into a nearly empty tank" experiment?
    • Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
×
×
  • Create New...