Jump to content
SAU Community

Recommended Posts

pplz i brought a power fc off a memeber on here just finished rebuilding my motor went to start it today and the power fc wont start the car when i turn it on and the fuel pump wont stop running and all the lights on the dash flicker

so i grabbed a standard ecu and it starts can somone out there help me asap as im in need of this car so i can go away

Link to comment
https://www.sau.com.au/forums/topic/110114-power-fc-wont-start-the-car/
Share on other sites

yes series 1 and series rb25 use the same model powerfc.

the only suggestion i can offer is to

check the powerfc is connected properly (loom plug is in OK)

no bare wires on the loom are shorted out

no wires loose or not connected properly

the powerfc doesnt have a burnt smell to it

does the hand controller come up and run ok if you just turn to ON and don't start the car? like can u actually use the hand controller like this?

umm no boost kit that i know about but how do i turn it off also no burnt smell the screen flashes with the sound of the clicking of the car its lights up i might try the power fc on a mates car

how do i turn the boost kit off i dont think i have one ???

try it witha jumper battery connected, noticed mine turns off and will not start the car without heaps of power..

plus it always turns on the dash lights then switches them off, clicks then they come on and car starts..

i cant get into the menu the screen flashes on the hand controller the relay in the back on the car in the boot next to all the fuses clicks as well while trying to start

i pmd the guy who sold it to me no reply yet

it was brand new im just hoping i can fix it the car has being off the road for 5 months now icthing to get it going

if i put up the numbers of the ecu can someone tell me wat model it is for ??????????

on the side of the ecu it should have the the model number

your looking for ECR33 or RB25 something something which should confirm the model number. its on a white sticker

when mine was fried the screen would go crazy and make constant ticking noises and never boot up

well the way i figue it can be the relay cause the stock ecu starts it no props im goin to try the power fc on my mates car today and ill post some numbers up if i cant get any futher with it

johnny cash : slept like a log just finshed work at doms

hey, mine did the exact same thing when we had the AFM wired up wrong. All the dash lights flicker on and off, the fuel pump goes flat out, and then eventually the fuse blows and the dash stops flickering.

Scared the shit out of us. No damage to the powerfc, just a blown fuse.

If its not the AFM, it will be something else shorting the f**ker out.

Good luck mate, and be careful.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
    • I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
×
×
  • Create New...