Jump to content
SAU Community

Recommended Posts

Guys, my gtr has been sitting around for a while without being started, and i tried to start it today - no suprise, a flat battery

So i get the jumper leads from the other car and hook them up, the voltmeter shows almost half way, i turn it over and the starter motor is working, but the engine wont fire up

What would that be?

The manifold pressure keeps rising as it tries to start ive noticed.

I cant roll start it - so that is out of the question

Thanks in advance

Link to comment
https://www.sau.com.au/forums/topic/110357-rb26-turns-over-but-wont-fire/
Share on other sites

Guys, my gtr has been sitting around for a while without being started, and i tried to start it today - no suprise, a flat battery

So i get the jumper leads from the other car and hook them up, the voltmeter shows almost half way, i turn it over and the starter motor is working, but the engine wont fire up

What would that be?

The manifold pressure keeps rising as it tries to start ive noticed.

I cant roll start it - so that is out of the question

Thanks in advance

Not enough voltage/current?

Turning over slow?

Try a better jumper battery, larger jumper leads or charge the battery overnight.

:P cheers :D

PS, you're a naughty boy, you should drive your GTR everyday.

It turns over at normal speed to start, then gets slower until theres nothing

Ive tried letting it charge for a while, but nothing

I also noticed the tacho goes spastic when the starter motor is trying to start the car

How would i charge it overnight?

It turns over at normal speed to start, then gets slower until theres nothing

Ive tried letting it charge for a while, but nothing

I also noticed the tacho goes spastic when the starter motor is trying to start the car

How would i charge it overnight?

Your also trying to push power from the jumper battery through the dead cells of the other battery. Overnight charging will be needed, also the cranking will be filling cylinders with fuel....not good for the plugs.

i had my car off the road for 4 months while respraying... then it never idled again after that ..

ECU shat itself somehow, didn't work til i changed to pfc..

battery for sealed 550CCA should be around $140

Steve, my car went flat while I was in Japan and there wasnt enough current left to jump it, or to register a charge using the trickle charger.

I got around it by connecting jumper leads at the back, connecting them to another car to get charge going in, then connected a charger to the terminals in the engine bay, which then registered charge.

Left it for 24 hours and hey presto :)

That said, it sounds like there might be another reason for your car failing to start :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Agreed, I've never seen a 260RS specific manual. As GTSBoy said it will mostly be stagea other than the engine loom https://www.hgeconsulting.com.au/stageaservicemanual.pdf
    • You'lll likely have to make do with R33 GTR for engine/tranny stuff, and Stagea for the body. I don't know that there's even been an actual diagram seen in the wild.
    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
×
×
  • Create New...