Jump to content
SAU Community

Recommended Posts

Been building a car in my backyard, driled out all the plates to paint the engine bay. kinda sliped when drilling out th complience plate and sent swirly drill marks on it, so it looks like ass now. Is it possible to get another one?

compliance plate should be fairly easy to replace. contact the person who issued it in the first place. i hope you didnt remove the manufactureres plate from the firewall though. they are affixed with a special type of anti-tamper fastener which maybe a little hard to replace.

compliance plate should be fairly easy to replace. contact the person who issued it in the first place. i hope you didnt remove the manufactureres plate from the firewall though. they are affixed with a special type of anti-tamper fastener which maybe a little hard to replace.

yeh, i taped that plate up for painting.

hrmm, i dont know who originaly complied the car, its been in australia for like 7years..

it has VAMBEX on it :

Vambex Pty Limited t/a Kensan Imports

7 Watland St

Springwood QLD 4127

(07) 3208 7210

:)

They might be able to assist you.

DOTARS would probably require you to hand back the original plate to avoid rebirthing or any other dodginess.

Hahah so does your head!

Its a question he is allowed to ask without flamers like you on his ass, so help him with his problem or stfu :)

-The force

Obtaining a blank compliance plate is also a part of the process to rebirthing cars.....This might be a legit question or maybe not

Obtaining a blank compliance plate is also a part of the process to rebirthing cars.....This might be a legit question or maybe not

and where am i asking for a blank one? im asking for a re-issue of a damaged one, stfu fag.

Vambex Pty Limited t/a Kensan Imports

7 Watland St

Springwood QLD 4127

(07) 3208 7210

:)

They might be able to assist you.

DOTARS would probably require you to hand back the original plate to avoid rebirthing or any other dodginess.

thanks very much, i dont have a problem if they want the old one, i just want a nice new one :happy:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...