Jump to content
SAU Community

Recommended Posts

yo would the 14 inch wheels fit an mr2 turbo???

if so can you post a pic plz???

Cheers matey!!!! :)

post-18510-1151704881.jpgpost-18510-1151705153.jpg

They came off MR2 -AW11. They are 4x100 I believed toyota size PCD.

Unless You got AW11 with engine conversion or turbo kit added on.

If You have MR2-SW20 model they are 5x114.3 same as Skylines ,RX7 etc etc wih big brakes clearence.

I have some 5 spoke in black not sure 14 but I think they are 15" .

  • 4 weeks later...
sorry to be late to replay.

No chance to get 4-th volk in 17".

I have same in 16" 5x 100 in white.

18? maybe

which ones are these, i like them

http://www.skylinesaustralia.com/forums/in...st&id=44306

how much are these freight to melbourne?

thanks

Mate to Your door -50$ with insurance , 40$ without insurance.

Edited by familka gtr
  • 2 weeks later...
  • 1 month later...
  • 4 weeks later...
  • 2 months later...
  • 2 weeks later...
  • 2 weeks later...

Anyone got bottom part of chest tool box on wheels and want to swap for some wheels or as part of payment?

Prefer ballbearing rolling shelfs.

  • 4 weeks later...
  • 6 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...