Jump to content
SAU Community

Sound Of Gurgling Water On Take Off?!?

sl33py

By sl33py,
in General Maintenance

 Share

Recommended Posts

sl33py Mentor

sl33py

Posted
Posted

I've got a 96 R33 GTS-T series 2 and every time I move off from being stationary, I hear what sounds like moving/gurgling water coming from the gearstick area (sounds more like it's behind that area that the actual stick itself). I've removed everything from the car that could possibly make the noise. I hear it every single morning without fail when I first move off, then as far as I can tell, I sometimes hear it when moving off again during stop start traffic. I've yet to test if braking heavily and then moving off makes it more definite (i.e. something getting moved forward during braking by the transfer of weight of the car and then getting pushed back again).

It sounds more internal to the cabin area, so I don't expect it's mechanical/engine related. Just wondering if anyone else has heard this before or has ideas. Cos it gives me the 5h1ts!

Link to comment
Share on other sites
  • 3 weeks later...
Sarumatix Veteran

Sarumatix

Posted
Posted

haha I have this noise too.. I assumed it was the fuel recirculating.. but it could also be the water pump speeding up. It seems to happen whenever you just start moving or when slowing right down.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • WMDC35
      Gran Turismo 7 Time trial

      By WMDC35 · Posted

      Blitz ER34 at some point hopefully, should be allowed in Gr3 if they do.
    • MBS206
      Blue Smoke from exhaust, RB25DE+T

      By MBS206 · Posted

      Stock R33 boost control, with the exhaust, and FMIC done, will boost creep. There is no tuning around it if it is the factory boost solenoid.   If it has an aftermarket electronic boost controller, the settings/mapping can be altered in it.   Oil could be anything as mentioned, however did it ever do it before you did the turbo swap? How much and how often did you drive the car before the swap?   I'm hinging on too much oil supply, or it's not draining properly.   To check, pull the air outlet off the turbo. Is it full of oil? Drop the exhaust at the turbo, does it appears to be oiled/coked? Now pull turbo and check the exhaust manifold, does it appears oiled and coked the same way?   Secondly, the PCV could even be stuffed / not functioning properly and will cause blowing of blue smoke.
    • hardsteppa
      Like loud exhausts? You could be a psychopath.

      By hardsteppa · Posted

      No "could" about it.
    • GTSBoy
      rb20de neo +t conversion - boost pressure sensor needed?

      By GTSBoy · Posted

      Almost any ECU would work, from a 30 yr old PowerFC to a new Motec/Autronic. But presumably you want new middle of the road ECU, meaning that you want a Haltech or a Link, most likely. As to which model though? I dunno. I don't keep track of what they have in their current ranges. You don't want a plug in though, because plug ins can start to cause you the same wiring issues that you have to chase up with your stock ECU/loom swaps when an engine transplant is involved. If you use a Haltech (and presumably a Link) you could put the base map for the engine in and drive it around and not even need to "tune" it. It will work just fine. I can't recommend a tuner without a location (and even then I can't recommend many, being as I never use any tuners except myself and my brother-in-law). And not many tuners are happy to remote tune. Maybe they'd be happier doing it for a basically stock setup that just needs to be demonstrated to be working properly. But even then, not being able to be with the car to see what the hell is going on and sort out the inevitable problems that will result from an engine conversion done by an amateur..... unlikely to be enthusiastic about the job. And if you think that just adding 2 wires for the boost sensor is difficult - you don't want to be trying to install and set up an aftermarket ECU. You're going to have to bite down hard on something with either approach.
    • deuceforty2
      Wiring loom difference between A31 A/T RB20DET and R32 M/T RB20DET?

      By deuceforty2 · Posted

      wired everything up and confirmed that the red with white stripe is indeed the fuel pump pin on this harness. 
×
×
  • Create New...