Jump to content
SAU Community

Recommended Posts

Hey everyone what's up.

I wanted to know if the sensor attached to the Catalitic converter is simply reads the temp of the exhaust or does it work like the O2 sensor in the turbo extension?

Basically I want to know if I can remove that cat sensor all together and not have it screw up any readings going to the ecu or, if I bang a pipe through the cat (so my exhaust is straight through yet still appears legal) and I leave the sensor would that do anything?

I appreciate the help on this one guys, thanks so very much.

Take care.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/111640-cat-sensor-question/
Share on other sites

I can confirm it has no input to the ECU and to the best of my knowledge is simply a temperature switch which activates the dash warning light when things get a little hot.

I don't know what the fine in Canada is for gutting or removing a cat for a road registered vehicle but in Australia the fine is substantial ($10,000 for a company I believe) and therefore it would make most people think twice about gutting it or removing it!

Hope this helps,

Cheers

I can confirm it has no input to the ECU and to the best of my knowledge is simply a temperature switch which activates the dash warning light when things get a little hot.

I don't know what the fine in Canada is for gutting or removing a cat for a road registered vehicle but in Australia the fine is substantial ($10,000 for a company I believe) and therefore it would make most people think twice about gutting it or removing it!

Hope this helps,

Cheers

You helped me soooooooo much man, thank you. I was hoping it was something like that.

As for the fine, it's actually not to heavy a fine here and I don't go in to the "problem" spots where cops like to wait *cough*streetraces*cough* so most likely I'll be fine. I do appreciate your warning on it though.

Thanks again brother for everything.

Take care.

Cheers :)

  • 3 weeks later...

The sensor is nothing but a heat activated switch for the orange "cat light" on the dash. You can indeed cut the entire sensor off (I only have a wire on my car now after i cut mine off) with no ill-effects. Most after market cats do not have a bung for the sensor anyway.

cool and the plug hole for the cat itself?.. i didtn get a cap for it :D tryna find a bolt but cant find the right size (at home that is) haha

Remove the sensor from the cat and go to somewhere like Bunnings where they have those rack of nuts & bolts that you can check the thread size & pitch. To plug up the std sensor hole, just buy a bolt the same thread and length as the sensor and bolt it it in the cat. But be warned - if you just cut off the sensor wire from the car and leave the sensor in, there is a piece that is prone to (loudly) rattle around and give you the sh!ts.

  • 1 year later...

after those few ~38 degreee days of this summer, it seems the sensor itself has shit itself. the cat light in the cluster of my car is randomly flickering on and off.

i'm not thinking the cat has shit itself because i havn't seen any difference in performance. i've gone ahead and cut the sensor wire but the problem still persists.

i don't have any aftermarket managment like the powerfc so what could be the problem causing this?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...