Jump to content
SAU Community

Recommended Posts

this is my second post about this problem with my car i have had no luck in finding the problem or having some one to find the problem..........its really annoying

if the car is under a little bit of load in a lower gear and i put my foot down and let the boost build up it will hit max boost then go into loop home mode y??

i have had the car at nissan for a diagnostic.........nothing all levels are normal when the car is running good and in loop home mode

i have checked all the cooler pipes all tight

this was happening b4 i had my car modified.........now that it is modded its still doing it even after being tuned on a dyno

any one have any experience with finding what it could be ???

its now booked in at maztech for them to give it a go over.........

i feel like this problem has beaten me

Link to comment
https://www.sau.com.au/forums/topic/111945-limp-home-mode-on-32-gtr/
Share on other sites

That's usually a crook AFM (switches to limp-home around 2500 rpm). Unless of course you can actually get it to go past the problem.

Alternately, it's a SERIOUS detonation problem, with the ECU doing some serious spark retardation.

had it run on the dyno at maztech......couldnt find any problems with it in limp home mode it made 162kw at all 4 wheels.......boost droped down to 7-8psi

they think it could be the fact that i had the stock boost restrictor taken out of the line and the boost solenoid cant handle the boost........all mixtures are fine...........so WTF..........i swaped itwith another gtr and same thing happens

could it be i need to use a boost controller ???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
×
×
  • Create New...