Jump to content
SAU Community

Recommended Posts

Hi All,

my car will be sent over via Mitsui OSK to sydney soon. after reading so many horror stories about theft and damage, i was wondering if you can tell me where most damage/theft occur? on the ship? at the docks? while being steam cleaned?

what are some ways to prevent all this from happening? pick up the car immediately after its off loaded? is it possible or does it sit in the docks waiting for customs clearance? my car has recaro seats, how likely is it to be stolen? what would you do if you have a car coming over from japan to minimise theft/damage?

thanks in advance for your help!

Apart from taking any small mods off the car in Japan and getting them posted to you i don't think there is much you can do. I've had 2 cars come over from Japan, both with expensive parts inside/in the boot and nothing was touched. I think the occurance of stolen parts is overplayed a bit because you only hear of the small number of cars that have parts stolen, not the hundreds of cars with nothing taken.

Apart from taking any small mods off the car in Japan and getting them posted to you i don't think there is much you can do. I've had 2 cars come over from Japan, both with expensive parts inside/in the boot and nothing was touched. I think the occurance of stolen parts is overplayed a bit because you only hear of the small number of cars that have parts stolen, not the hundreds of cars with nothing taken.

you're right but i really dont want to be one of them :D

just out of curiosity, which tranport company did you use? is theft generally done by the people at the docks or done by people who work for the shipping companies? i have heard more stories about damage/theft from kiwi than the others. also, how much to insure the car for the trip from japan? will it cover for theft/damage in the docks too or just on the boat?

thanks!

http://www.skylinesaustralia.com/forums/in...showtopic=66972

http://www.skylinesaustralia.com/forums/in...showtopic=61232

Can happen anywhere along the line. I've had three cars come in (two NYK Line, one Mitsui OSK) and nothing has gone wrong. If you're worried, use a container and you can be present at opening.

I think only KIWI offers decent insurance but there's a thread here about how hard it is to claim through them.

When the dealer imported my car the wheels were stolen off it as it had 4 space savers

It was imported via Kiwi

Edit - The dealer has also imported cars and had them stripped of all aftermarket parts (back in the Sevs days)

When the dealer imported my car the wheels were stolen off it as it had 4 space savers

It was imported via Kiwi

Edit - The dealer has also imported cars and had them stripped of all aftermarket parts (back in the Sevs days)

yikes! just when i thought it was safe going back into the water.....

were the dealer cars imported through kiwi also?

so from hearing quite a few problems people had with kiwi, is it safe to say that the things were stolen by employees of kiwi? or is it the lack of security at their holding yard at the docks?

Here's a couple of Kiwi threads for ya.

http://www.skylinesaustralia.com/forums/in...showtopic=61211

http://www.skylinesaustralia.com/forums/in...howtopic=104288 (read this one)

Generally I'd say it's going to be hard to ascertain WHERE exactly things go missing from a car (if they do). There are a lot of hands that go through your car before it leaves the docks. The exporter can only have so much security but after that it's in everyone elses hands.

Think about it. Once your car leaves the auctions it will be in custody of:

- the buyer (whoever bought it from auction)

- holding yard (usually same as the buyer)

- shipping company

- wharvies

- cleaning (AQIS) agents

- any transport company (eg towies)

That's potentially five different groups of people who will have access to your vehicle before you will.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This is the GTR fuel pump. Yellow shows 12V, orange shows earth. The ECU provides the earth to activate the fuel pump relay. The ECU side of teh relay will pull low when the ECU activates. This is the RB20 fuel pump. Almost the same, but a little simpler. You can see I indicated (above) where the 12V line goes down to the RB20 diagram on the overall diagram, whch shows both RB26 and RB20. This is where I show it coming in on the RB20 diagram below. You can see that the dropping resistor is handled differently. When the fuel pump control is not providing earth to the pump, the pump earths through the dropping resistor and thus runs at lower voltage (some is wasted over the resistor) and runs slower. I showed that "not 12V and not quite earth" portion of the wiring in a paler orange. The rest of the wiring that I did not colour on that little section below the pump would be orange when the fuel pump coontroller is providing earth. This drop is handled inside the fuel pump controller in the GTR. Regardless, you can see where 12V is supposed to be, where earth is supposed to be. The key on prime is via the ECU providing the pump for only a few seconds the switching off. You should be able to see that happen.
    • Yeah so when you turn key to IGN the fuel pump should run for a few seconds. If you find the fuel pump relay (and have a multimeter, and a second person) to can check the relay inputs.  One trigger pin should be either fully earthed  The other trigger pin should get 12v from the ECU for say 3 seconds when you turn key to IGN, and at all times that key is at START (note, I said this from memory, it may be the other way around, ie one pin always has IGN 12v and the earth has continuity to earth when you turn the key) One Pin should have a good battery voltage The last pin goes to the fuel pump + Also note that if the power to the relay is good, and the relay is working, it is worth checking the pump has a good earth too. There is a computer in the standard system that increases the earth resistance to slow down the pump when not required, pretty old school and it may have failed
    • All this talk about fuel and fancy ECUs, meanwhile my poor old R32 has neither.... When the ignition is turned on, should there be power running o the fuel pump constantly or just for the few seconds it usually takes to prime the pump? About to go have another look at it, have watched some YouTube vids on how to use a  multimeter and looked at some wiring diagrams but really have NFI what I'm looking for because electricity is invisible  
    • Yuh....but weren't all the supertourers, except maybe the Audis, FWD? I don't recall any of the others being AWD.
    • They ran them in Oz Super Tourers too https://www.supertouringregister.com/register/vehicle/212/ (I'm so old I remember racing with Matthew Fox) They ran them in Oz Super Tourers too https://www.supertouringregister.com/register/vehicle/212/ (I'm so old I remember racing with Matthew Fox)
×
×
  • Create New...