Jump to content
SAU Community

Recommended Posts

lets have a civil debate about this and try to think outside the RB world.

both an R33 series 1, 1.5 or 2 can be had for about $15K

manual soarers are now around $15K also.

r33 gtst weighs what.. 1390kg?

soarer weighs 1530kg with 10L of fuel and empty boot and no spare. (found this on a web site)

both come with LSD and a tough 5 speed box.

skyline = 187kw

soarer = 206kw (apparently)

both inline 6's that like to rev.

RB's have oil control problems in extreme conditions.

1jz doesn't seem that have that.

1jz has a toyota tough bottom end which cops a fair bit more than the rb does before quiting.

1jz head is designed by yamaha and is seen as an upgrade for the 2jz 3L bottom end (so it's pretty damn good)

not sure on stock 1/4 mile times on either car.

now..

the weight (and I guess possibly looks) is the downside of the big toyota.

and I'm not sure how much more power it needs to make the same 1/4 time as an r33 gtst.

I'm sure there is some sort of calculation.

anyway, I'm assuming this is going to be a one sided arguement on this forum but some people might take off there stove top glasses and look outside to see there are other things around..

lets get some decent posts here as to why you think one is better than the other.

I hazard a guess that about 90% or more of the skylines here never see a drag strip or circuit so they are pretty much street only.

so does the soarer then win over the r33?

does the extra power and torque of the 1jz win over the more nimble r33 with less power and torque?

discuss

Link to comment
https://www.sau.com.au/forums/topic/112259-1jzgte-v-rb25det/
Share on other sites

  • Replies 92
  • Created
  • Last Reply

Top Posters In This Topic

Manual SOARER? :yes:

Do they come in Manual?

never seen 1!

My friend has a Cressida with 1jz in it, its a soarer engine, it goes hard, but then again, wasnt hard as my previous 300zx stock power wise, bit similar to skyline!

so if a 1jz in a soarer with that much of weigh. hmmmm...skyline would have had it.

I assumed soarer is heavier than Cressida?

from what i know (please correct me if you disagree)

turbos in the 1jz will handle ~16psi reliably

turbo in the rb25 will handle ~12psi reliably

1jz stock bottom end will handle in excess of 300kw

rb25 stock bottom end limit is around 280-300

for very similar mods, you will extract more power from the toyota and it will be stronger, although 1jz in an auto soarer isn't particularly inspiring in my opinion. but in manual chaser format... :)

as much as i love nissans, you gotta respect the strength of the toyota.

having said all that, if given the choice of a soarer or a skyline, i'd take the skyline any day of the week.

continue debate :yes:

no way, non vvt 1jz's have always been 206kw - any number of HPI issues will say this...the vvt version has more torque and probably more power but not quoted due to the 206kw gentlemens agreement between the manufacturers for max power in japan

I testdrove an auto 1j soarer when looking at a r33, the soarers more of a cruiser - its super quiet inside, a/c is excellent, visability great, really comfortable ride, the auto was fantastic, and seemed to have a higher build quality than the nissan BUT the skylines feel more livelier - eg: brakes and steering feel muddy with the soarer, and they have friggin massive doors- must weigh like 200kgs each!! I was also disappointed in the 1jz but i think if it lost the auto and the 1600 or so kg it had to tow around it would be a great car. No comment on the manual as i didn't drive one but from memory when driven right they run a 14.0 sec quarter so thats quicker than a stock r33 manual by a long shot.

Manual soarers dont have the great skyline 5 speed, but the r154a isn't a bad box, and i believe the lsd in the soarers is hell expensive to replace if things go bad. Oh and brakes are smaller than the r33 (2 piston fronts, single piston rears i think????)

i dont think you can compare them against each other, the engines possibly, the cars no. the arguement of oil related problems in the RB really only applies to track cars, how many rbs that are street driven within normal power outputs have failures due to oil starvation/flow in the head?

the skyline is an agile young go getter sportscar with fairly nice handling, power, response, brakes, box, interior and great looks. overall good sorted package

the soarer is an auto (most likely) powerful but lazy grandpa couch car. its luxurious and has tons of crap inside. its also much larger and heavier. it would handle i expect like a boat.

the skyline would nail it (i would expect)

1jz-gte no doubt in my mind.

but they are not in a nibble car.. therefore R32 gts-t for the win.

I'd considered a 1jz-gte into an r32 .. but too much stuffing around.

GTST - you fail to point out that manual soarers are very rare, maybe 1 in 20 are manual. Its not really applicable to talk about something that is not that readily available.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • (it is a brand new ported mellings pump) I suspect the lack of pressure is due to the leak. It was *not* that low in other logs of oil pressure in the past. It wasn't that hot either, but not far off.
    • Would a Mellings oil pump be a viable option  From my time with a LS, and talking to tuners and LS specialists, the "weak" OEM oil pump is one of the first things they recommend to swap out if I was going to give the engine any high RPM I opted for a Mellings high volume, with the high pressure springs and I never had a issue with it Cost wise they are not expensive in the scheme of things 
    • Just bought a 2002 Stagea 250tRS VR-X Four AERO VQ25DET and spent the last two weekends cleaning and detailing it.. still have to do the wheels and the engine bay but the rest of it came up nice. Imported 2011 to S.A. and I'm the third owner since it was imported. I met the guy who brought it over, he went to Japan and picked out the car, bought it and ordered the wheels. He also gave me a list of stuff he did to the car with receipts. Coil overs (I have the original springs), 3" exhaust from the dump pipe back no cat, Custom dump pipe,(I have the original exhaust), Plenum spacer, 18" custom Work XSA wheels (need restoring, I've made a start..), Shift kit put through the 5 speed tiptronic auto, TV and menus/screens changed to english, Australian DTV tuner installed in rear. I've just had four new discs and new pads as well as all the fluids including the brake fluid replaced. I have all the receipts for the last 15 years and the import papers in a nice folder. Car looks great, goes like hell but fuel economy is not a thing lol.. pics next..
    • I ended up in this rut again lol, and used a shit ton of filler. One thing I can't understand is, even after using a big long block and going in long X pattern strokes, I always end up at bare metal again with no filler, and my repair started at one end of the door and now I've chased my tail to almost the other end of the door. I was thinking of hitting the panel with a hammer where it might be a high spot and making everything low then filling it, I did this on a small section on my other door by mistake and I think I fixed it lol. Is this a bad idea? The other thing is with guidecoat, whether it's the powder or spray, after I sand all the guide coat off, it doesn't reveal anything for me in terms of high spots and low spots and makes it especially hard when it's bare metal (at least in powdered form), am I doing something wrong here, or likely a high spot I keep going over and creating valleys? Lastly, stupid question but, is it possible that after sanding if I only sand over the filler area where I know to be a dent that it's impossible for me to dig into that dent? Unless there are other problems which I missed.  
×
×
  • Create New...