Jump to content
SAU Community

Recommended Posts

Hey guys,

is it on tomorrow night?

anyone going?

I have thursday off - so good chance ill be racing :D

My aim is to not be the slowest NSW member on the list..:(

although being the wooden spoon isnt soooo bad I guess..:(

Link to comment
https://www.sau.com.au/forums/topic/112315-wsid-5th-april/
Share on other sites

We were up there, despite the tyres on our trailer popping on our way, ran a 10.8 @ 128MPH backing-off at some 320m... i tryed to keep it in the 11s so i could get another pass but... o well

Time for a rollcage and a host of safety equipment, ill be absent for a couple of months :

Link to comment
https://www.sau.com.au/forums/topic/112315-wsid-5th-april/#findComment-2074642
Share on other sites

Fuel - Vortex 98

Nos - Not this time lol

Slicks - MT 26.0 x 10 full slicks

i removed the street slicks due to not enough TRACTION

ran 1.46 60 foot

video will be available on saturday for my website

www.wild1motorsport.com

old video clips are on there now

Link to comment
https://www.sau.com.au/forums/topic/112315-wsid-5th-april/#findComment-2074741
Share on other sites

Liz - sorry I didnt see your post till now!

Abo Bob - great to meet you mate and congrats on your new PB!

I had a great first run, got my PB inthis car - 14.6@95 with just a cat back and pod.

my best 60 footer of the night was 2.0 although lost it somewhere in mid/top and did a 14.8 :D

Link to comment
https://www.sau.com.au/forums/topic/112315-wsid-5th-april/#findComment-2074943
Share on other sites

I had some fun last night was dissappointed was running 13.7's pretty much all night. went backwards with the azenis. will go back to racing on street tyres.

Had fun racing adam he had the faster time but i got him on the lights.

Link to comment
https://www.sau.com.au/forums/topic/112315-wsid-5th-april/#findComment-2074954
Share on other sites

Nice to chat legend (and thanks for the lend of the jumper) weevil and spx.

Only 4 runs last night which was a bit annoying. I know I can go faster but gotta get everything right on the first run.

Congrats on the 10 Mr33. You got there! Now to add the extra weight of a cage. I came looking for you mid evening but perhaps you ran the 10 early as I couldn't find you.

Not many liners there and half of those that were were not from here.

Poor old legend broke a drive shaft on his last run. Had trouble hooking up all night.

How funny were all our first runs? Everyone got about a second or 2 seconds slower than they were expecting.

Link to comment
https://www.sau.com.au/forums/topic/112315-wsid-5th-april/#findComment-2075088
Share on other sites

My Pleasure Bob,Damn drive shafts :devil: Give em a big burnout for sticky tyres and a bit a power of the line and they dont wanna play, recon I woulda run a good time with that one , Well thats my excuse and im sticking to it :D

Link to comment
https://www.sau.com.au/forums/topic/112315-wsid-5th-april/#findComment-2075984
Share on other sites

Fuel - Vortex 98

Nos - Not this time lol

Slicks - MT 26.0 x 10 full slicks

i removed the street slicks due to not enough TRACTION

ran 1.46 60 foot

video will be available on saturday for my website

www.wild1motorsport.com

old video clips are on there now

Good work champ!!!!!!!! what was the half track et and speed?

Link to comment
https://www.sau.com.au/forums/topic/112315-wsid-5th-april/#findComment-2076584
Share on other sites



  • Similar Content

  • Latest Posts

    • Before I commit to it as I already have the wastegate off the car, would you change it to the 9psi spring instead of the 12, or whack it back on now and try your suggestion?   Edit: Actually I might just swap the spring and see what the logs say after another few pulls, as we know it's still spiking without the Mac valve in the picture so I need more data without the Mac valve trying to combat the issue.
    • Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
×
×
  • Create New...