Jump to content
SAU Community

Recommended Posts

Hi,

I've noticed of late that when I go from first to second I get a crunch - regardless of if I'm pushing it or not (occasionally it doesn't happen though). From any other gear to second there's no crunch, and from second to any other gear is also crunchless. Actually, it's more of a feeling than a noise and it feels like one part is going faster than another. Once you get it in gear, it's fine.

Could this be the clutch playing up, or something in the 'box itself?

My previous car had a 3rd gear crunch for ages and it was OK. Mind you a new gearbox (or clutch for that matter) is worth more than the car itself. Is this likely to be a problem, or just a nusience?

Link to comment
https://www.sau.com.au/forums/topic/11246-crunch-in-2nd/
Share on other sites

Ok, sounds like a plan.

1) What fluid should I use.. Some sort of castrol oil I imagine, but what sort?

2) How do I change it? (lol!)

3) Would I be better off paying someone to do it, or is it a simple thing? I kinda want to learn how to do small maintenance tasks by myself.

Link to comment
https://www.sau.com.au/forums/topic/11246-crunch-in-2nd/#findComment-189207
Share on other sites

I have the same problem , car has now done 56,000kms and is due for a g/box oil change .

I jacked both sides of the car (with poxy car jack grr) put car stands under them went to the shed to get 1/2" drive ratchet to undo the drain plugs , couldnt find it DOH !

I bought some VMX80 Castrol oil to go in as others have had good results with it . If it doesnt solve the problem i'll look for the redline oil .

Link to comment
https://www.sau.com.au/forums/topic/11246-crunch-in-2nd/#findComment-189247
Share on other sites

Gearbox oil will help but won't cure it altogether. It's a very common problem on these cars, it's just worn synchro's, probably from too many Japanese boy racers flat-shifting before it arrived here. Redline heavy weight shockproof oil is the stuff to use if crunching is bad, if it's not too bad then try the light weight.

I find on mine that it crunches a lot less after the gearbox has warmed up. Until then I find that I can help stop crunching by not going straight into second from first, but going to the centre first (ie, where the gate for 3rd and 4th is). I can also stop crunching by doubling the clutch, but it's easier to do it the former way.

Link to comment
https://www.sau.com.au/forums/topic/11246-crunch-in-2nd/#findComment-189279
Share on other sites

Ok. So first port of call is gearbox oil. I'll try some VMX80 first and it there's no luck, go to Redline. If nothing else, the VMX80 will clean out the box. I believe 3.8 litres is the magic number here :-)

Now, (to prove my general ignorance of car mechanics), I assume the drain plug is on the bottom of the gearbox. And it would make sense that the fill hole is up the top of the gearbox. Just where abouts is it?

I think I might do it next weekend when I go to my old's place.. They have some ramps I can use to hold the car up and enough tools to get by.

I had the clutch replaced as part of buying the car, 'cause during testing it would slip under heavy load. And now there's this gearbox crunching... Perhaps I should look at changing the diff oil too?

Link to comment
https://www.sau.com.au/forums/topic/11246-crunch-in-2nd/#findComment-189345
Share on other sites

The Redline Shockproof Gearbox Oil is great stuff. Its very expensive but the quality is right there! It loosened up 1st and 2nd and i haven't had a 4th crunch yet.

One problem I am having though and i thought putting the redline gearbox oil would fix it but im starting to think its a clutch problem... hopefully someone could advise me.

About 5 times now (in 5mths) I have had this grinding type noise in 1st + 2nd only with the clutch is in. I can be upshifting, downshifting or just sitting at the lights and this noise will appear.

3 of these times its happened within 1km of driving so I was thinking maybe something is just abit cold and give it abit longer to warm up although Saturday night on my way home from the Palm Beach cruise (drove 100+ km that night) the noise was appearing in 1st+2nd it didnt matter how much driving the car had done.

The noise is quite loud and the first time it happened I sh1t myself, pulled over and switched off the car, infact that time I think I had it in neutral and the only way to stop the noise was to turn the car off (the noise continued for about 5sec after the ignition was off i guess as the engine/gearbox/whateva was winding down).

Does anybody have any idea what this noise is?

Its starting to scare me and its quite embarressing when you pull up at a set of lights in a nice looking car only to have this LOUD grinding noise appear. The clutch feels really nice and ive only ever dropped 1 proper burnout the rest is just hard accellerating in 2nd + 3rd + 4th and it feels fine to me.

Link to comment
https://www.sau.com.au/forums/topic/11246-crunch-in-2nd/#findComment-192647
Share on other sites

I have the same problem!

going 1st to second i have to give it a shake in neutral before going to 2nd when the gearbox is cold and once it's warm it's pretty much OK.

Will i have to use differnet oil cause my gears have a shortened/quick shifter in it ?

Also... where are the seals?

As mine leaks a tiny bit of oil... not enough to hit the concrete, but you get a faint whif under high load from under the Shifter boot... and it's not the nicest smell.

Link to comment
https://www.sau.com.au/forums/topic/11246-crunch-in-2nd/#findComment-193095
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...