Jump to content
SAU Community

Recommended Posts

KKK twin turbo setup..

2 KKK turbos

manifolds to suit

2 wastegates

dump pipes into 4 inch (cut just before the cat)

2 air filters

cross over pipes in alloy

all silicon hoses and hose clamps

all oil, vacuum etc fittings

every thing needed to fit into a GTR with RB26

kit is off a R33 GTR Wide Body.

Selling for $3500ono

need to get rid of it ASAP

call Jeremy on 0414879711

or Pm me and ill check in the arvo's

cheers

post-21361-1144640412.jpg

Edited by DVS32R
Link to comment
https://www.sau.com.au/forums/topic/112637-twin-kkk-turbo-setup-for-gtr/
Share on other sites

g'day mate,

is this a high or low mount set up?

what condition are the turbs in, how many K's?

How many hp they rated for?

got any pics?

cheers

Hey Fellas. Got a KKK twin turbo setup..

2 KKK turbos

manifolds to suit

2 wastegates

dump pipes into 4 inch (cut just before the cat)

2 air filters

cross over pipes in alloy

all silicon hoses and hose clamps

all oil, vacuum etc fittings

every thing needed to fit into a GTR with RB26

kit is off a R33 GTR Wide Body.

Selling for $3500ono

need to get rid of it ASAP

just bought a house.

call Jeremy on 0414879711

or Pm me and ill check in the arvo's

cheers

this turbo setup sits about flush with the top of your cam covers.

Turbos are in excellent condition.

R33 GTR was making 400kw on 20psi.

Edited by DVS32R
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...