Jump to content
SAU Community

Recommended Posts

nah this is quite BS aye...like seriously my teins are so stiff is because it prevents me from slideing side ways on a turn....and plus THERE is no RULE saying STIFF SUSPENSIONS = YELLOW STICKER :P i mean i can understand my wind screen is cracked but my suspensions is perfectly good i think......mmm all i can really do now is get PEDLARS or WILKINSONS to write me a letter saying my Tiens are good and that guy can get stuffed.....for his bs reason lol

mmm sooo angry aye

yeah i dont think that will work at all

i've heard of plenty of ppl getting done for hard suspension. its not some new special "everyones out to get u" rule

thread closed. please use your other yellow sticker thread. U dont need to create a new thread every five minutes for every issue that comes up

http://www.skylinesaustralia.com/forums/in...ic=111617&st=20

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
×
×
  • Create New...