Jump to content
SAU Community

Recommended Posts

well it depends what other support mods are on the car, fuel pumps injectors, intercoolers etc. My car blew some ring lands at 1.1bar and that´s with a HKS GT3040, ARC fmic, stock injectors and engine management. Other people have done 1.3 bar, other less than me. You just have to mod the car the way you want, put it on the dyno and tune it to the max it will handle.

Andy

well you cant say a certain boost pressure is what an engine can take..

difference cams can affect the compression ratio hence allowing you to run more boost.

the main thing that will hurt the engine is the tune, not boost.

also remember that each turbo can flow different rates at each level of psi..

for example : HKS 2535 at 18 psi tops out at 250rwkw where as a HKS GT3040 at 18 psi is pushing 300rwkw..

both these engines tuned at the same place, sam cam specs injector sizes and mgmt ECU..

craved is spot on here. most people think boost dictates how much power a car makes, that is not true at all. a car tyre at 30psi and a truck tyre at 30psi. both have the same pressure (or boost) but both have completely different amounts or air in them. airflow makes power. so its true that a gt2835 at 9psi may be fine but a gt42 at 9psi may not, as the gt42 will flow a stackload more air, maxing out injectors and so on...

Sydneykid did an excellent post about this topic, (where? I dont know) he went on to explain how removing casting roughness in the manifolds and how intercooler and piping size all effect the final outcome.

airflow makes power.

Your question should be "How many KW can I safely squeeze out of the RB25" and the answer is around 250 rwkw, some have died before this and other have gone past it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
×
×
  • Create New...