Jump to content
SAU Community

Recommended Posts

hi, my r33 skyline is blowing smoke at idle or any rpm and i cant seem to solve the problem. I had the turbo rebuilt thinking that would solve the problem but it still happens. Ive done a compression test and thats all ok. I disconnected breather hoses from engine but still smoke. took of oil dump pipe and ran oil into bucket to make sure wasnt a build up of pressure in turbo while engine is running. motor does not have high oil pressure and flowed 1.5 litres of oil in a minute from turbo oil feed. I am still getting oil leaking from compressor and exhaust side of turbo which must be why engine is blowing smoke but like i said turbo was rebuilt by someone who has a good reputation. can any one give me a idea of what to do as i have no ideas left.

thanks dean

Link to comment
https://www.sau.com.au/forums/topic/114314-blowing-smoke/
Share on other sites

Was it still blowing smoke straight after the turbo rebuild?

What colour is the smoke?

Also i would be taking it back to the guy who did the work or go to another turner and get him to look at it.

yes was blowing smoke straight after but i also tried another second hand turbo and it did the same thing. smoke is white and is not consistent as sometimes its heaps and other times its less. B4 i rebuilt turbo it only blew puffs of white smoke at above 4000 rpm and went away. after rebuild it blows smoke non stop. Is their a place in adelaide sa that tests turbos of the car. thanks dean

Link to comment
https://www.sau.com.au/forums/topic/114314-blowing-smoke/#findComment-2105922
Share on other sites

yes was blowing smoke straight after but i also tried another second hand turbo and it did the same thing. smoke is white and is not consistent as sometimes its heaps and other times its less. B4 i rebuilt turbo it only blew puffs of white smoke at above 4000 rpm and went away. after rebuild it blows smoke non stop. Is their a place in adelaide sa that tests turbos of the car. thanks dean

Run the car and go round to the exhaust pipe. take a whiff of the smoke. what does it smell like? it shouldnt be fuel smoke as you said it was white. fuel smoke should be black. im thinking you may have water thats being passed through the exhaust pipe. probably a coolant issue. blown head gasket possibly? burnt oil is usually a bluish smoke colour, but you may wanna check out all possibilities. are your intercooler pipes all properly connected?

Link to comment
https://www.sau.com.au/forums/topic/114314-blowing-smoke/#findComment-2107189
Share on other sites

Run the car and go round to the exhaust pipe. take a whiff of the smoke. what does it smell like? it shouldnt be fuel smoke as you said it was white. fuel smoke should be black. im thinking you may have water thats being passed through the exhaust pipe. probably a coolant issue. blown head gasket possibly? burnt oil is usually a bluish smoke colour, but you may wanna check out all possibilities. are your intercooler pipes all properly connected?

hi, when i take the intercooler pipe from turbo its got oil in it aswell as when i take exhaust dump pipe off its oily and looks wet even after ive cleaned it out. so smoke must be comming from exhaust wheel of turbo. If turbo has been rebuilt does anyone have an idea of what else could force oil out of both ends of my turbo.

Link to comment
https://www.sau.com.au/forums/topic/114314-blowing-smoke/#findComment-2107738
Share on other sites

White smoke usually means water, so either you may have a head gasket problem or if possible one of the water lines in the turbos is leaking.

Are you using any water at all? Check all levels.

Also let it idle so the water temp gets up to operating temp and see if you are leaking any water.

Put your hand over the zorst and feel if it is wet. Do that while it is still running and has warmed up.

Let it cool down over night and check your water levels.

If the water levels have changed then it is possible that you may have water leaking into the zorst.

Link to comment
https://www.sau.com.au/forums/topic/114314-blowing-smoke/#findComment-2108196
Share on other sites

White smoke usually means water, so either you may have a head gasket problem or if possible one of the water lines in the turbos is leaking.

Are you using any water at all? Check all levels.

Also let it idle so the water temp gets up to operating temp and see if you are leaking any water.

Put your hand over the zorst and feel if it is wet. Do that while it is still running and has warmed up.

Let it cool down over night and check your water levels.

If the water levels have changed then it is possible that you may have water leaking into the zorst.

jsut like zardos said, head gasket maybe, or the cooling line for the turbo. That "oil" you mentioned might be the coolant, coolant dont evaporate. but leave it for a while ( especially if it mixes in with shit residue inside the pipes) and it feels kinda oily.

Link to comment
https://www.sau.com.au/forums/topic/114314-blowing-smoke/#findComment-2110099
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...