Jump to content
SAU Community

Recommended Posts

Hi Everyone,

I am finally selling the parts from my beloved Skyline. Been hanging onto them for a few months, as after my R32 GTST was written off from a truck hitting me from behind!

I was hoping to use these on my next car a R32 GTR. But have since decided to go for a slower more luxurious car. (Until my right foot gets lighter ;0)

These are great quality parts, Pick up is fine in Sydney (Parramatta Area) willing to courier Australia Wide at buyers expense.

Please reply to [email protected] if you have any questions.

Cheers,

I also have a Drivers Side Window seal in Very Good Condition.

(the one the window rests on when closed) It is still in the box I recieved it in, was bought off Adelaide Imported Parts.

$85 only want what I paid for it.

SARD Fuel Pressure Regulator – FPR

• Excellent Condition, Comes with bracket for R32 GTST, Only on car for 5000km

$165 ******** SOLD ************

Monsta GT SPEC DELTA FIN INTERCOOLER Kit For R32 R33 Skyline GTST

• Was only fitted to my car for 2 weeks = (

• Comes with all brackets, Sillicone hoses, clamps and fully polished aluminum piping kit

• Intercooler core has a few dents, but overall wont affect cooling efficiency at all.

• Plus it’s a big as intercooler

• GT SPEC DELTA FIN INTERCOOLER flows a massive 394.3cfm. The high consistency, low pressure drop of 0.2psi at 20psi boost is rated at greater than 800HP. That's more than what some 9 seconds car uses.

• Cooler Size 600X300X80mm Overall size 800x300x80mm.

• The Delta fine is weighs much lighter than the bar and plate intercooler.

Constructed with the highest quality aluminium structure and welding. The cooler are light weight, polished with high cooling capacity.

• Fully Polished Piping Kit

$425

Blitz Daul EBC

• Comes with wiring and Daul solenoid

• Great Condition was working fine when pulled off car.

• Top of controller has been warped a bit due to too much Aussie Sun!

• But doesn’t affect performance.

$440

HKS Turbo Timer + wiring - $60

Blitz BOV - $110

HKS SUPER POWER FLOW AIR FILTER – Green

• Comes with bracket for fitting to R32 GTST - $100

3” Catco Cat with 5” Body 706 CFM Model

• Only on car for 5000 kms

• Has a few cosmetic dents on underbody as can be expected from driving on Sydneys dodgy roads.

• This cat is fantastic and was originally bought from BATMBL

• After I fitted this onto my car felt great gains especially in high revs!!

• Great performance Mod on a Budget!

• Made from 304SUS (surgical stainless steel) outside, and unlike the other high flow CATs which have a ceramic honeycomb inside, this has a stainless steel honeycomb which has 200 holes per sq inch instead of 400 holes per sq inch, which basically means the holes are twice the size of the other Hi-flow CATs. It is now the highest flowing CAT on the market

• 3" CATCO CAT (has 5" body, 200csi steel inside) = 706CFM

$285 ****SOLD*****

Pressure Release Radiator Cap – RARE

• Now this came with the car and is really cool!

• After you have given your car a nice ‘work out’ on the road you can press the button on the top and it releases the pressure from your radiator.

• Sounds like a small BOV and you can see the excess water get released and bubble in the water tank.

• Everyone who has seen it thinks its awesome and most have never seen one before

$70

Gennuine Cusco Strut Brace from my R32 GTST.

Will take a $100 for it.

123.gif

1234.gif

Sony Explode 700W 10” Subwoofer in a Box

• Box works great although the colour scheme looks a bit rough

• Nice compact box, nice sharp bass!

$60 - **SOLD**

**********PICTURES BELOW**************

Edited by tyger

Hi Mate,

Sorry the car has since been taken away to write off heaven.

Only managed to pull these parts off.

Cheers,

P.S Pictures are in the next post.. forgot to add them.

PPS Warning I think they are really big!

hey chief

have you got the gtr front bar still, if so are ya lookin to get rid of?

Dont know where my post with the pics went?>

May be they were to big!!!

If any one wants pics Pm or email me and I will forward them..

Thanks

email sent. and yes those pictures are massive! haha

Thanks for the bump wolverine!

This guy is always on time and a cash payer =0) great buyer.

****BTW Sub is SOLD***

free bump, good guy to deal with on two items in the last few weeks.

FORGOT TO MENTION!

I also have a Gennuine Cusco Strut Brace from my R32 GTST.

Will take a $100 for it.

123.gif

1234.gif

Thanks for the bump wolverine!

This guy is always on time and a cash payer =0) great buyer.

****BTW Sub is SOLD***

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...