Jump to content
SAU Community

Neo Engine And Tiptronic Transmission Package.

Abo Bob
 Share

Recommended Posts

Abo Bob Grand Master

Abo Bob

Posted
Posted

By casting around and taking bit's and pieces from several cars I am able to offer the following package. It would suit someone doing the full job on another car like a R31 or something lke that.

RB25DET NEO engine - comes with turbo, manual loom, coilpacks.

R34 Auto transmission - all sensors etc.

Stock auto ECU from R34 GTT.

R34 GTT shifter and linkages.

An R34 GTT steering wheel with shifting buttons and airbag can be supplied if needed.

All wiring diagrams necessary for the conversion can be supplied.

Everything is in Sydney and will probably be in the northern beaches for pickup. Freight will cost extra.

I can't really give you pics at the moment because a number of these parts are still in various cars. Suffice to say they are all the standard parts. All parts will be coming off the cars for various upgrades over the next few weeks.

Things of note. We don't have an AFM at the moment but quite possibly will have one in about a month. We don't have the engine fan either so a thermofan would do or I believe the other RB engine fans all fit anyway.

Also, given that the manual loom is supplied rather than the auto one, you will have to run a few wires to the auto trans but I'll see what I can do about supplying those at least.

Cost is $4000 non negotiable.

Please pm questions or call me on 0421 301 061.

  • 2 weeks later...
  • 4 weeks later...
satanic Grand Master

satanic

Posted
Posted

LX_SS; can you please be more specific on which parts you want in particular?

2rismo; are you referring to the gearbox? If so, it's the stock auto box with all associated bells and whistles.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      first time swapping rb25det into r34

      By Murray_Calavera · Posted

      This sounds like a perfect excuse to install a Haltech R3.
    • Kinkstaah
      first time swapping rb25det into r34

      By Kinkstaah · Posted

      I do believe from context he is talking about a S0/S1 R33 RB25 with associated ECU and Wiring for that, and a manual gearbox into a R34 N/A Auto. I don't have the knowledge of all the pinouts and such but my gut feeling from doing my own conversion is to use as much of the R33 stuff that you can. The "car" wiring is quite seperate from the "Engine" wiring when all things are considered. The only things to truly consider 99% of the time is the cluster, reverse lights and potentially disabling the 'not in P/N' immobilizer circuit.
    • GTSBoy
      Rusty roof repair

      By GTSBoy · Posted

      A realistic expectattion of how long it has to last also comes down to.... when do you think you will be banned from registering and driving old petrol powered shitters? It's 27 years since that thing was built. It probably rusted out 15 years ago. It was probably repaired and looked OK for another 10. If you do a similarish bodge job now, or perhaps slightly better with some actual rust conversion and glassing, then.... get another 10-15 years out of it, after which you'll only be permitted by the CCP to drive electric cars manufactured in their Shenzen zone anyway. 
    • GTSBoy
      first time swapping rb25det into r34

      By GTSBoy · Posted

      Let me assume that the concern over a manual ECU is that the NeoDET that you have was an auto and has an auto ECU. That ECU will not be a problem, but you WILL have to Nistune it. And you would have to Nistune it even if you had a manual ECU, because the turbo ECUs will shit the bed if they do not have all the things that they were told they have to have, to be happy. The big one being the TCS CU, which you won't have in your car. Anyway, with an auto ECU (which I have running my originally auto NeoDET in an R32) Nistune allows you to put in a Stagea image which doesn't panic about the absent TCS, and allows you to override a whle bunch of other annoyances that would otherwise see the check engine light on 100% of the time. Also, you can't wind up the power very far on the stock NeoDET ECUs without Nistune, because the boost sensor gets in the way. Nistune allows you to push that problem much further up the dial. Do you even have the boost sensor with the engine? Without it, you are SOL and will need an aftermarket ECU (or to find a sensor somewhere, god knows where). I can't tell you what the wiring loom differences are in a 34. But what Duncan said above needs to be considered. When you say "loom", does that include the transmission loom? Because you will need to swap out the auto tranny loom for the equivalent manual loom, and get rid of the neutral/park start interlock (basically hot wire it).
    • WR33KD
      Ogura orc1000f vs Osg tr2cd vs Osg r3c experiences, max torque/max hp?

      By WR33KD · Posted

      I have had the r3c in for years now, maybe close to 7 years and it has never missed a beat, anyone can drive it. Super easy to drive around town, the hotter it gets does get a little hard but it holds the power easy as 
×
×
  • Create New...