Jump to content
SAU Community

Recommended Posts

hey guys,

picked up my r33 which passed all the inspections but i have a problem.

the car randomly stalls at low revs.

i have heard that this can be caused by the bov?

i am running a turbo smart type 2 which is plumbed back.

its really weird, ill boost the car then slow down say, for a corner and when im sitting waiting in neutral the revs will jump up and down then the car will stall.

do i have to adjust my bov? or is somthing else causing this?

sorry for the newb questions.

cheers

Link to comment
https://www.sau.com.au/forums/topic/114500-r33-stalling-at-low-revs/
Share on other sites

to reset the factory ecu i have to unplug the battery for a few hours?

as for the stock bov, i dont have it as i bought the car with the turbo smart already installed.

failing that im booking my car into a performance shop nearby which do good work for a full service/tune and hopefully they'll be able to iron out the problem.

well i took the terminal off for a few mins and made sure no power was left in the car and took it for a drive all was fine until.... came back up my drive in 1st, put my foot on the clutch to slow down and bleh.... i lost power steering for half a second and i thought the car had died but the revs kicked up and it kept running.

this is really not cool aye, when i take it to the peformance shop ill get them to check out the afm and all that.

cheers

the car is running fine, when its not idling.

the few times its almost stalled, the battery light has come one when the revs are jumping up and down and the car feels like its going to stall but doesnt.

could it possibly be the idle bypass valve sticking?

if i come up to an intersection in 4th, stop, and put my foot on the clutch the car is fine, but if i stop put it in 1st and roll forward then stop, the car starts having a fit and the revs jump up and down and the car shudders like its going to stall.

any ideas?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...