T04GTR Posted April 28, 2006 Share Posted April 28, 2006 cool. a anti 3litre argument. Link to comment https://www.sau.com.au/forums/topic/114818-ohmagoshbang/page/9/#findComment-2125392 Share on other sites More sharing options...
Moanie Posted April 28, 2006 Author Share Posted April 28, 2006 hello monaSorry to hear about you motor. I got some parts laying around at my shop if you need something. Standard cranks,rods,ETC. As for the engine, I wouldnt really blame the Tuner.Sounds & looks more to an oil surge which could of been a long thing comming. As for this rev limit business,I sit on the limiter which is 8200RPM doing my burnouts with the standard motor on 18 psi.As doughboy and buster have seen.I wouldnt blame hitting the rev limiter. What is you rev limit set on mona and do you have an oil Pressure guage in the car.What oil do you use in your car. my opinion on the cause is either -Rod gave up -Oil surge For this to be caused by pinging the pistons would of all been rounded on the edges due to detention. Good luck with your new build.I would stick to the RB25.RB26 if you want to spend the money. I wouldnt recommend going to the RB30 stage till you wanna run in the 9`s. I don't think i ever blamed the tuner?! but i did say my car has a very long history of pinging... i NEVER had a ping free tune!! on the road.. most times... on wsid... i always saw the check engine light flash and would fix by chucking in octane booster! rev limiter is set to about 7.5k i think... and i VERY RARELY hit it! even at ec! i did hit it once or twice when i was still learning where it was.. but thats all... and on the track... i don't think i hit the limiter at all!!! there isn't even enough room to! it was an oil surge and not detonation like i previously thought.. but it does look like (as adrian has stated) that there was some detonation... and my mechanic did see alot of damage due to detonation in the engine... it may very well have been a combo of both! no oil pressure gauge and i use motul! thanks for the offer for parts... i'll keep that in mind! Link to comment https://www.sau.com.au/forums/topic/114818-ohmagoshbang/page/9/#findComment-2125394 Share on other sites More sharing options...
T04GTR Posted April 28, 2006 Share Posted April 28, 2006 yess. oil surge is the suck. hope all are learning from this debarkle and there was no evidence of detination on any of the good pistons. so chances are you propbably had a dicky knock sensor..or they were done up to tight on the block ie.. track use you MUST add at least an extra 1-1.5 litres of oil. but any way...back the the great debate.........: for all intents and purposes a 3litre would be the go. i have given this much thought. from having a 330rwkw dr30 i know traction will be very limited on the street. so either way a 3litre or 2.5 doesnt really mater. from a budget and down time point of view id do a 2.5. but for the wow factor and ultimatly the better setup for the street id go 3litre. besides. why rev it past 7k anyway. i know mona doesnt like lag so chances are itle have a relativly small turbo. clearly the combo works whether it be with a 26 head or 25 head. so you have my support either way Link to comment https://www.sau.com.au/forums/topic/114818-ohmagoshbang/page/9/#findComment-2125396 Share on other sites More sharing options...
T04GTR Posted April 28, 2006 Share Posted April 28, 2006 omg your up ::: MY HEAD HURTS Link to comment https://www.sau.com.au/forums/topic/114818-ohmagoshbang/page/9/#findComment-2125398 Share on other sites More sharing options...
Moanie Posted April 29, 2006 Author Share Posted April 29, 2006 hahahahaa.... i crashed while still tipsy... so i have no hangover!! goo meee Link to comment https://www.sau.com.au/forums/topic/114818-ohmagoshbang/page/9/#findComment-2125404 Share on other sites More sharing options...
Moanie Posted April 29, 2006 Author Share Posted April 29, 2006 and yesss.. didn't know about adding additional oil for track use! last time my oil was topped up was the dyno day!!! DOH!!! well.. you live and learn! and a stuffed knock sensor hey?! thats the firs tthing being changed!!!!!!!!!!!!!!!!!!!!!! Link to comment https://www.sau.com.au/forums/topic/114818-ohmagoshbang/page/9/#findComment-2125407 Share on other sites More sharing options...
T04GTR Posted April 29, 2006 Share Posted April 29, 2006 from what it seems its overly sensitive. this can happen from having the sensor to tight. the pistons are perfect. not a whisper of detonation Link to comment https://www.sau.com.au/forums/topic/114818-ohmagoshbang/page/9/#findComment-2125408 Share on other sites More sharing options...
d0p3y Posted April 29, 2006 Share Posted April 29, 2006 RB25/RB26 FTW. That is all. Link to comment https://www.sau.com.au/forums/topic/114818-ohmagoshbang/page/9/#findComment-2125409 Share on other sites More sharing options...
Moanie Posted April 29, 2006 Author Share Posted April 29, 2006 yeah.. wish i had the hand controller to see how much it really was knocking Link to comment https://www.sau.com.au/forums/topic/114818-ohmagoshbang/page/9/#findComment-2125414 Share on other sites More sharing options...
T04GTR Posted April 29, 2006 Share Posted April 29, 2006 whats ftw? Link to comment https://www.sau.com.au/forums/topic/114818-ohmagoshbang/page/9/#findComment-2125415 Share on other sites More sharing options...
2rismo Posted April 29, 2006 Share Posted April 29, 2006 the pistons are perfect. not a whisper of detonation I'm confused then. Is that someone else's piston? Link to comment https://www.sau.com.au/forums/topic/114818-ohmagoshbang/page/9/#findComment-2125445 Share on other sites More sharing options...
2rismo Posted April 29, 2006 Share Posted April 29, 2006 hahahahahaThats easier to repair adrian bit of welding machining then its brand new You're a dangerous man Jase!!! I love it. Link to comment https://www.sau.com.au/forums/topic/114818-ohmagoshbang/page/9/#findComment-2125448 Share on other sites More sharing options...
shif_tea Posted April 29, 2006 Share Posted April 29, 2006 I'm confused then. Is that someone else's piston? Think he meant the other 5 pistons. I saw them and i agree they all looked perfect. Link to comment https://www.sau.com.au/forums/topic/114818-ohmagoshbang/page/9/#findComment-2125459 Share on other sites More sharing options...
2rismo Posted April 29, 2006 Share Posted April 29, 2006 Think he meant the other 5 pistons. I saw them and i agree they all looked perfect. Ahh cool. Link to comment https://www.sau.com.au/forums/topic/114818-ohmagoshbang/page/9/#findComment-2125466 Share on other sites More sharing options...
BU5TER Posted April 29, 2006 Share Posted April 29, 2006 cool. a anti 3litre argument. Not really just misinformed parrot quoting information and being corrected, I too get sick of all the go RB30 talk as its not always the best or easiest solution as I keep saying each RB has a place if only we could all get over our oooh RBXX is the best attitudes and keep open minds Link to comment https://www.sau.com.au/forums/topic/114818-ohmagoshbang/page/9/#findComment-2125475 Share on other sites More sharing options...
Moanie Posted April 29, 2006 Author Share Posted April 29, 2006 well.. dn't worry peeps.. i've decided on going a full rb26 conversion!! Link to comment https://www.sau.com.au/forums/topic/114818-ohmagoshbang/page/9/#findComment-2125505 Share on other sites More sharing options...
2rismo Posted April 29, 2006 Share Posted April 29, 2006 You champ-een! Link to comment https://www.sau.com.au/forums/topic/114818-ohmagoshbang/page/9/#findComment-2125510 Share on other sites More sharing options...
shif_tea Posted April 29, 2006 Share Posted April 29, 2006 well.. dn't worry peeps.. i've decided on going a full rb26 conversion!! lol seeeeef Link to comment https://www.sau.com.au/forums/topic/114818-ohmagoshbang/page/9/#findComment-2125519 Share on other sites More sharing options...
Morgs Posted April 29, 2006 Share Posted April 29, 2006 Wanna buy my engine package? Link to comment https://www.sau.com.au/forums/topic/114818-ohmagoshbang/page/9/#findComment-2125521 Share on other sites More sharing options...
Moanie Posted April 29, 2006 Author Share Posted April 29, 2006 hahaha... nah.. thanks morgs i really am still deciding! its alot of money to consider! my mechanic is putting together a pricelist with possibilities.. it really comes down to what i'm willing to spend... and depending on my mood down the track it can range from alot to very little... Link to comment https://www.sau.com.au/forums/topic/114818-ohmagoshbang/page/9/#findComment-2125563 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now