Jump to content
SAU Community

Recommended Posts

Hey Guys,

Im pretty new to this forum, and yeh i have a R33 Seris 2 4 Door, and i have a crack on the left corner of my front bumper... What do u guys estimate for the repair of such damage? Any body u guys recommend to fix this sorta thing?

Thanks!

Link to comment
https://www.sau.com.au/forums/topic/115786-front-bar-repair-prices/
Share on other sites

  • 5 weeks later...

Its a stock front bar, think its plastic, its for a s2 4door so it differs from the s2 2door (dif fog light section), thinkin about doin it at just a normal panel beaters.

Im actually living in kalgoorlie atm... so theres really only 2 places to go to get it fixed ><

  • 2 weeks later...

Give Cowley Smash Repairs a call..

talk to Brett 9350 5069, tell him michael with the r33 sent you :devil:

here is a couple of photos of what my nismo frontbar looked like when i gave it to them

imgp50939vr.jpg

imgp50958dj.jpg

imgp5110medium9si.jpg

and when it was all finish it looked like this

msnpic9qk.jpg

there was over 3 full days of work in just my frontbar, they are the only person i trust doing fiberglass work. They also got a frontbar which was to suit a gtr to fit a gtst

Thanks Michael :D

well i got my repairs in kal for half price cause my mate knew the guys at the panel beaters, fixed up the front there and a dent in the back corner of my car (near the taillight) all for 500 bucks, which is normally like a $1000 job for both areas to get fixed. Downside, i checked my ODM and there was a extra 2 km on it (2km to drive from the front back to the shed and back???) power was on which i never leave on and all aircon switched off etc... Now my car makes this rattling noise when i go over bumps...

thats the next thing now, wtf is this rattling noise :rofl:

  • 3 weeks later...

kalgoorlie a-z auto care centre, i did find out wat the clunking sound was, in my boot there was a couple of screws missing in the floor panel, they must of forgot to rescrew it up after beatin the panel out

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...