Jump to content
SAU Community

Any Of You Know If A Rb20 O2 Sensor Will Work On A Rb25det Series2 Engine?

NateR31

By NateR31,
in Engines & Forced Induction

 Share

Recommended Posts

predator Grand Master

predator

Posted
Posted

It doesn't give the correct voltage readings the ECU requires to do its closed loop operation. Therefore it's not economical. But it's not like the car won't run.. you can unplug totally it and drive around - it just will suck a lot of juice.

I tried one of these "EL - fits R33/R32" sensors into my old rb20det.. and plugged in the consult port and voltage was all over the shop. Since then a few are adament it's fine on an rb25.. but I haven't yet stuffed around checking how the ECU reads the voltage on the rb25 ecu yet.

BH_SLO32 Proficient

BH_SLO32

Posted
Posted

I've run the RB20 sensor on my RB25 for a period with no noticeable side effects. The range of the sensor read by the RB20 and 25 ECUs is the same so I couldn't imagine there would be any real difference although I am not sure.

NateR31 Grand Master

NateR31

Posted
  • Author
Posted

reason i ask is that my o2 sensor died so i was eating alot of fuel, i tried the EL sensor thing, checked on the pfc controller and its working, but i dont know what volts and ect.. its ment to be on.

can someone see what volt at what rpm it should be?

mad082 Grand Master

mad082

Posted
Posted

$105 from autobarn for a direct fit o2 sensor. it is the proper one. it also fits sr20 pulsars and nx-r's. part number OX-203 otherwise for an extra $5 you can get a NGK one, but i don't have a part number for it, but it is listed in their pricelist (has R33 in there. thats how i know it is the same one as in a pulsar. same part number).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PuReOwNaGe
      Wanting to Sell my R32 GTR

      By PuReOwNaGe · Posted

      Sorry
    • Danowner
      Hypergear ATR45 SAT Turbo With addons (brand new - never used)

      By Danowner · Posted

      Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Julsmadrid
      RB25det

      By Julsmadrid · Posted

      Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • soviet_merlin
      Hypergear ATR45 SAT Turbo With addons (brand new - never used)

      By soviet_merlin · Posted

      Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • Danowner
      Hypergear ATR45 SAT Turbo With addons (brand new - never used)

      By Danowner · Posted

      I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...