Jump to content
SAU Community

Recommended Posts

Hi all,

was at the Melbourne motor show today and in Bay 21 there were these people selling "Stromberg High Frequency Converters". Basically they reckon that when you install these, it triples the frequency of the sparks in the spark plugs, thus increasing the amount of fuel burnt and positively affecting economy and power.

They reckon anything up to 20% power increase, 14% petrol saving, increased spark plug life as well as other benefits.

Here is a URL i found on these things: http://www.geocities.com/surbolabuan/Stromberg.html

Does anybody know if these things work? Is it worth forking out $250 for a set of 6 for my line?

-Max

Hahah not another one...

Nahh man i would keep ur money in ur pocket.

It sounds like a scam, the website is a geocities one for gods sake

And it doesnt even work.

Ive never heard of this brand/product, and without knowing it, i can say its prolly like all those other magic fuel savers etc that do Sweet FA, ie fuelmaser REF Current Affairs Last year

Hey but if u still think that it may work, get it, then get ur car dynoed. If it doenst work, then bring it back for a full refund. U will onlu loose out on the dyno cost.

The link you provided also supply the infamous "Surbo" a known fraud. There's no evidence of any research or studies on how this spark thing actually works & it would appear a good name associated with carburettors is being used in a thinly veiled attempt to establish credibility for a product that has no sound basis - or even explanation - as to how & why it should work... ????

If you want something easy, cost effective that will improve performance and economy, try a tin-based fuel catalyst. these things most definitely work as claimed, regardless of whether you have any other mods.

I'm surprised the motor show organisers let these people in !!

Enrico,

I've had fuel catalysts installed on two different cars - yes they work, just as claimed. They lean out mixtures, as tested on a dyno with EGO probe, decoke the engine, as evidenced by oil that goes black as sh1t after 700-1000k's after fitting, better throttle response and economy + reduced emmissions.

Fuelstar's website now has links to before/after dyno charts, and the tuner had the sensibility to measure intake temps to compensate for any associated power gains/losses. Of particular interest is the XR6 ute, due to the timeline of runs and esp. the 180SX which has the same dip in the power curve that we've ALL seen on Skylines - right as the cams "come on" in kicks the knock sensor. Fuel catalysts fix this without ECU adjustment.

Powdered tin was issued to GI's in WWII, so they could use contaminated or very poor fuel in practically any internal combustion engine - so yeah they work and it's nothing new...

Sorry to rave - a fuel cat will pay for itself in petrol savings within a year if you drive regularly - you even be able to use lower octane fuel. I will soon fit one to the BigDatto and publish the results over a 10,000k period.

http://www.fuelstar.com/whatsnew.html

again, NOT a gimmick.

Hope this adds, etc.

Correct.

Tin, being a soft metal like lead will prevent VSR in "old tech-valve & seat" engines without the toxicity of lead. A Very Good Thing.

The classic & collector crowd have been using fuel cats for yonks - fit & forget. They work just as well on modern hi-tech donks. My old man had a Morgan +8, a tarmac rally Mini & a concours Cooper S... and fitted fuel cats to all of them. Thay made more power on ULP than leaded with no engine mods + reduced fuel consumption.

How many performance mods actually pay you back ???

BigDatto, you say that these catalysts lean out fuel - wouldnt this be pretty dangerous when already running mixtures on the edge?

Have you heard any reports of people using these in modified cars.

At well over the $1 mark for 98ron, these sound interesting, but when you include the cost of a new tune, or perhaps a rebuild due to detonation - I am a bit scared:)

Cheers

Steve

Good point , Steve

From my experience the correction in A/F ratios is subtle compared to a say a programmable ECU or interceptor tuned for a few more herbs, and only if it's required. As for highly tuned vehicles I couldn't tell you.

When I enquired about an appropriate unit for the BigDatto, they posted back this of particular interest:

sounds good to me, but then I plan to keep the stock turbo...

Hi Y'all,

Just saw an ad on the telly for "Today Tonight" (ch.7). One item mentioned was a device which claims fuel savings of 27% and looked very much like a fuel cat. I'll be watching this tonight with interest !!:D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys, just after some guidance with an R34 sunroof that has stopped working correctly. It still opens and closes perfectly fine, but it no longer tilts/vents up or down. As a result, the rear of the glass now sags a bit as it drops down slightly in order to retract into the roof, but now it can't pop upwards into a flush position. I’ve probed the pins on the back of the switch connector with a multimeter and it seems like both switches (for open/close and tilt/vent) still work correctly. Any ideas on what it could be, or where I should even start in terms of diagnosing? I'm sure someone's had this issue before but I haven't been able to find anything online relating to this specific issue, most of the issues are with the seals leaking or the motor failing entirely. Thanks in advance!
    • Do you have some data like fuel pressure? It's really hard to say if you're still fighting a fuel system issue at this point. Could be something weird like the FPCM dipping out.
    • Yeah in that case, pulling the dent out. Event a very slight dent can create a lot of work filler-wise and there is a strong chance the panel won't be the factory shape when you are done (as the dent will result in a new high point created somewhere, then everything is brought up to that new high point... but the panel shouldn't be that high if that makes sense).  So you've filled and primed the panel and it is flat, why would you go back and remove the primer and add more filler? 
    • Something else I have been faffing with while the car was off the road is making the AC work. Assuming the car isn't at a thermal limit the idea of having AC while waiting in line to go on track sounds delightful. I have actually been lugging around the weight of the entire system since 2018 when the RB25NEO went in without it working at all.  The main reason was in the first few events before I got around to re-gassing it the rubber hose that runs under the manifold had the factory heat wrap/sleeve fail resulting in this: ~2 years ago I purchased a complete used R32 AC line set but when I finally went to install it the line i needed was different where the expansion section is I found a local place that was able to replace the rubber section and re-crimp. They also added some modern heat sleeve to the hose Tight fit but fingers crossed this is the last physical piece of the puzzle needed
    • the top black section is bonded to the silver section with some form of rubber. I assume to isolated NVH from the box
×
×
  • Create New...