Jump to content
SAU Community

Recommended Posts

guys, i saw this in the website,http://www.carbibles.com/additives.html

The magnet-on-your-fuel-line boys

FuelMax loses to FTC for deceptive advertising claims.

[motorup]

The marketers of the Super FuelMAX automotive fuel-line magnet, advertised as providing dramatic fuel-saving and emissions-reducing benefits, have agreed to settle Federal Trade Commission charges that their claims were unsubstantiated. These guys claimed that sticking a pair of magnets around your fuel line would increase your gas mileage by 27% whilst reducing harmful pollutants by 42%. The one slight flaw in their plan? There's nothing in fuel that can be affected by magnets......

The FTC alleged that the manufacturers did not possess or rely on reasonable substantiation for the claims they made. The complaint also alleged that the manufacturers falsely represented that tests performed at a certified EPA laboratory prove that Super FuelMAX performed to the above figures. Finally, the FTC charged that ads for Super FuelMAX featuring a testimonial from Alexander Elnekaveh endorsing the product did not reflect Elnekaveh's actual experience with the product or the typical or ordinary experience of members of the public who use the product. Therefore, the FTC complaint said, the representations concerning the testimonial were false or misleading.

Click here to read the FTC Report on the FTC vs. FuelMax.

Click here to see all the FTC Reports pertaining to FuelMax.

Not the first time and certainly not the most notorious. For the older members on the forum, same may remember a certain Australian race car driver known as Perer Brock and the demise of the HDT marque.

Taken from en.wikipedia.org:

Brock developed an interest in New Age-style spirituality through practitioner Eric Dowker. Brock began publicly supporting, and eventually began to fit to HDT specials, a device called the "Energy Polariser", containing strong permanent magnets, which claimed to improve the performance and handling of vehicles through "aligning the molecules". The overwhelming majority of the Australian motoring community regarded the device as pseudoscience. Brock also recommended that the tyre pressures for his polariser-equipped vehicles at what many regarded as near-dangerously low levels. Holden, fearing the consequences of being associated with the device, cut ties with Brock and set up an alternative racing/modification operation, Holden Special Vehicles.

mm speaking of scams, check this outtt

http://www.turbonator.com/

Found it on a honda civic forum (dont ask) funnily enough.

Maybe the magnets made the car think that it was getting better fuel economy and therefore it did? placebo effect :unsure:

mm speaking of scams, check this outtt

http://www.turbonator.com/

Found it on a honda civic forum (dont ask) funnily enough.

Maybe the magnets made the car think that it was getting better fuel economy and therefore it did? placebo effect :)

hiclones in disquise.....wank wank

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...