Jump to content
SAU Community

Recommended Posts

Hello all, I have spent the last couple of years slowly building a website designed to help people new to the Nissan Skyline. It includes specifications and tuning guides for turbo versions of skylines from the R32 onwards.

I have also including sections covering the following

turbo upgrade specs

AFM specs

cam specs

HICAS, ATTESSA, NVCS and how these systems work

40 imbedded videos of the best skyline clips I could find

wallpapers

history of modifications to my own car

plus much more

I am updating the website regularly so feel free to bookmark the page. If you have any ideas or notice mistakes (other than spelling and grammar) please fell free to pm me.

Hope you find it useful

cheers

nissan skyline

Edited by Munna1
  • Like 1
  WhitePrincess said:
nice one mate, was very interesting to read.

one question though... if you put a manual boost controller, what do you have to do to disable that dual stage boost control thing you were talking about??

On the passangers side stut tower there is a solenoid with 2 hoses and 2 wires comming out of it.

Remove the hose that goes to the wastegate actuator and the hose connected to the nipple on the intercooler piping. I think its the top one on the solenoid but I cant remember.

Remove the two wires via the plug on the solenoid

Install a new hose from the actuator straight to the nipple on the intercooler piping.

You have now removed the two stage boost control and will be running 5 psi throughout the rev range.

You need to cut the new hose to install the manual boost controller.

So you will end up with the hose comming of the piping to the boost controller then to the actualtor.

Pictures would explain this better but I dont have any a search on these might be helpful to

cheers

  siddr20 said:
A very well written documentation dude..

Well worth a read people..

Thanks Siddr20 I still have a lot of work to do.

R32 GTS-T, R33 GTS25-T and R34 GT-T Specifications added. I hope to have a GTR tuning guide by the end of this week.

cheers >_<

  PHATR32 said:
thats some good stuff, and noob will benifit greatly.

are you 100% sure removing the boost restrictor gets you 1 bar?

I cant say I have done it myself but several people around the forum have done it and run 1 bar

cheers

Edited by Munna1
  • 3 weeks later...

Almost finished stage 2 mods (minus AFM and injectors)

Havent had mine tuned yet but im hoping to get just over the 200 mark...

Any chance of stage 3 with some power estimates? (For RB25)

Thanks Lithius

Trooper I certainly will be completing a stage 3 guide for the RB20 RB25, and RB26.

I have just completed the stage 2 engine tuning guide for the GTR.

I hope to have more detailed information like cam specs etc. shortly.

If you would like to be informed about new updates etc. you can subsribe to my free newsletter.

cheers

Edited by Munna1

Mad site! Helping me out at the moment, when im looking at the basic mods for my car.

However, i must ask a question - is it more worth getting a pod filter or a FMIC for the maximum gains? I know getting both will def get me a canary (specially after i get the exhaust put on)

Any suggestions?

I have just added a Tech Resources section this contains turbo specs with power outputs and AFM information. This section will soon contain injector information and a unit conversion tool.

Emsta an intercooler will give you better results

I see you have a r33 gtst id suggest upgrading to a R34 GT-T intercooler if you can get your hands on one efficient to 200rwkw.

If you plan on up-grading your turbo down the track you may need something bigger. Some brand name intercoolers (blitz is one I think) use a piping route which still allows you to still use the intake snorkel (they dont have the pipe running over the front of your engine) in this case you just need to put a high flow panel filter in your airbox. I only installed a pod and CAI because my piping was in the way of the snorkel.

cheers

Edited by Munna1
  • 2 weeks later...
  • 2 weeks later...

quick question can u pm me the answer please...

looking at buying a second hand 32 gtr.. 86K Km's on the clock (cant say if original) its dead stock and want to know wat RWKW is should produce standard, and also wat compression ratio should i be hoping for? anything else to look oput for on a second hand 32 gtr?

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drilled the rubber out on a slow speed and it didn't catch much at all. Probably only half a dozen holes was enough to shred the rubber and it dropped off easily leaving the inner sleeve behind. Will tackle that later
    • I havent bought a manual cover for the dash yet and no cluster change, won't bother me too much, I just need to get that auto box gone, manual in! I miss my manual. 🤪. We started last weekend and managed to get the box out. Planning to start putting it in this weekend and then order a single piece tail. We were super careful to take time and not damage anything. It's my first time working under the car.  With my S15 mainly worked in the bay. This time, it was a headache because of three or four bolts only. They simply didnt want to leave thei homr and the one securing the tailshaft, another above the GB, and the one securing the lipstick was a shit. Mates mate, Davo caught fire 🤣, nearly opened his chest up with a grinder 🤦🏽‍♂️ and both mates nearly had a plate from the box land and slit their head open. Fun times. We all survived. Not the easiest working with limited access on jackstands. As I'm sure we can agree these are the memories which make us love our car. For all three of us, was an awesome weekend and Sunday 3.30am before tools down was a fantastic effort. I need to upload pics, but looks like it needs to be via Url now. We used to be able to just upload pics back in the day. It's been that long! 🤪 Im currently spraying rustoleum under body, not because it's rusted. It's super clean, but just so it's protected for the next 10 years. There was a few surface rust spots. Which pretty much wiped off with a 3M scourer.  Really impressed with how well the previous owner maintained it. Bank account went down so quick! Service, then GB - managed to get a spanking new 34 genuine box from Nissan. All the rest of the conversion parts from Kudos.  Went with a Nismo short shifter. New pedals and Exedy Clutch and FW. Ordered the Prp Rear Main Retainer kit which should arrive Friday and my first engine mod part just like I did with my S15 will be the Tomei Expreme Turbo Outlet. Already on order. It'll likely sleep next to me on a pillow during the coming months. 🥰 Last build was on my JET200GT profile and on SAU and Hardtuned I had documented the build. Planning to try to do that again. Brands feel scarce now. Wish we still had ARC and Apexi parts readily available. Exhaust - need some advice on this. I had an Apexi exhaust on the S15 and loved the tone. My mate had a HKS HP Silent on his 33 and suggested I go with that to avoid drone. I can't remember hearing an RB25DET running that so will likely need to wait for a meet or something to hear it.  Not after big power, just enjoy building it, and drivability with minimal negative attention.
    • Have a chat with Ben at Moore Performance or Jesse at JS Performance.
    • Thanks both. All good advice. Reminds me of drilling through stone wall for drainage pipe 😬 I'll let you know how I get on if I still have use of my hands afterwards 😅
    • Finally got shipping number for the intake and throttle body, shipped by UPS, so "should" be in my hands sometime next week, fingers fracking crossed
×
×
  • Create New...