Jump to content
SAU Community

Recommended Posts

Hey all

Just wondering if anyone has ever had a rb20det replaced in there car?

If so how much did it cost you, where did you get it done and were you happy with the work.

Brisbane only though.

Thanx

yep had plenty of experience with rb20 replacements always been happy with result, just some advice id stay away from tokyo toys racing they will rip you off and stuff you around. as for price it depends where you go it could cost anywhere from $1000-$1500 for motor and about $600 for a gearbox. diy replacement is very easy as the rb20 is quite a simple motor to work with.

Engine should cost you around $1500-$2000 for a decent one.

6-8 hours @ $55/hour = $330-$440 + any fluids, belts, filters, hoses that may be required.

I would budget $2600 and you should be ok.

I thought you were getting your rebuilt by someone at the moment Jay?

Engine should cost you around $1500-$2000 for a decent one.

6-8 hours @ $55/hour = $330-$440 + any fluids, belts, filters, hoses that may be required.

I would budget $2600 and you should be ok.

I thought you were getting your rebuilt by someone at the moment Jay?

i was going to get it rebuilt and modded but then started to think about selling and then this happened and was undrivable so now am getting another rb20 put in and will decide what to do.

probs move on.

i was going to get it rebuilt and modded but then started to think about selling and then this happened and was undrivable so now am getting another rb20 put in and will decide what to do.

probs move on.

Well I can still do a full rebuild for $3200 for you. That includes engine removal and refit....plus complete head service with valve regrind and new stem seals + guides...plus full block service, crack test, re-deck, hone, all gaskets, seals, oil, oil filter and labour. For an extra $100 I can get the injectors fully serviced as well.

Anywayz...just another option for you...

What happened to it by the way?

Id go the rebuild...

Ive been burnt twice with half cuts and unknown motors...

Rebuild is worth a couple of bucks more and at least you will know what you are getting. Plus its newer this way also...

If your not mechaniclly minded and dont know any trust worthy workshops, then Dan is ya man....

Love the kind words fellas...keep 'em coming.

And yeah like Col said, if you aren't mechanically minded, know anyone who is, know anyone who knows anyone who is, know anyone whose cousin's friend knows someone who is....then I'm your man :D

But honestly, even if you are mechanically minded you shouldn't tackle a rebuild with at least someone who has done it many times before to guide you. It's a little more than slapping nuts and bolts together.

You mean you actually think mechanics do something during the day....nah we just lean up against the hoists and sink beers, make up stories, laugh at random comments, then drive all the cars out and charge the customers for work we never even did.....ahhh it's a great life.

Well I can still do a full rebuild for $3200 for you. That includes engine removal and refit....plus complete head service with valve regrind and new stem seals + guides...plus full block service, crack test, re-deck, hone, all gaskets, seals, oil, oil filter and labour. For an extra $100 I can get the injectors fully serviced as well.

Anywayz...just another option for you...

What happened to it by the way?

Compleatly unrelated to the topic. But injector service for $100??? Including labour!? Dude thats good hey.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HPA do an interesting video on tuning, and Adrian shows on the dyno, moving from 10:1 to 12:1 (And I think even 13:1) and the power moves SFA. However, a couple of degrees of timing has a HUGE impact. Exhaust side of things will more be the length of the exhaust and how many bends and turns you have. The straighter you can keep it, the better. By a lot. Oh, and getting the diameter right. Bigger isn't always better. Going to big can actually lose you power.
    • I have to say, most people I see on the road fit the bill of atrocious drivers. Whether they be cowboys in their dual cabs, bogans in the Commodores, or the soccer mums. Pretty much most people on the road put zero freaking thought into driving. Barely look further up the road then the end of their bonnet, and have never even thought about how catastrophically wrong shit can go, by doing what they all deem as normal driving. Especially their late braking, racing to stopped lights, and sitting half a foot off the bumper of the car in front at 110km/h. Wanna know what's even better? By the time their kids get to be old enough to learn to drive, they've already got in the back of their brain what is normal driving, how annoyed you're allowed to get at people etc, and then their parents who actually have zero freaking skill at driving (Even though they constantly say "I've been driving for 20 years and never had an accident!") teach the little twerps how to drive, or should I say, how to make a car move. Literally watched a parent teach their L Plater, on a 4 lane freeway, that you just slam the brakes on, and push your way over, even with a B Double bearing down on you, and that's how you should drive, rather then, just keep going to the next exit. Same shit happens all the time for side streets etc, watching numpties pull dumb shit turns pushing across 3 lanes of traffic, rather than just go up the road another 30 seconds, and take the next turn that'll get you to the same location... Oh, and the damn right lane bandits. Or the retards driving along with their headphones in, and can't hear the ambulance or fire truck right up their ass about to run them over...   Pretty much, people drive on the road, like ego centric f**ks, and don't actually think how dumb shit their driving is, how it could easily kill them or someone else in a split second, or at the very least, how they're driving is contributing to all the shit they're bitching about on the road, like shitty congestion!
    • Yeap, not as doorty as ITB's, but alot more doorty than before, induction sound great when I'm up it 🤗
    • Any difference in induction noise?
×
×
  • Create New...