Jump to content
SAU Community

Recommended Posts

Hey guys,

I guy I recently dealt with offered for me to sell these white face dials as a GROUP BUY!!

He has offered us a great price - only $70, they retail for $130 at AutoBarn and Motoquipe!!!!

So its a great price!!!

Info on the Dials:

- Made out of high quality plastic (similar to factory)

- Professionly screen printed

- The standard illumination supplied is usually Blue and Red, if special request with enough interest, any colours may be organised.

- Professionly cut

- Direct fit into standard cluster (No Modifcation required)

They are lit by the standard gauge cluster lighting (they are not electroluminescent) through the face which tints the light a different colour. (see image).

Ive seen these in person (R32 and R33) and the quality is excellent, much better than the cheap ebay versions!

I am in charge of accepting payments and I will be accepting Direct Deposit and PayPal (I would prefer paypal for YOUR peace of mind as they have preotection)

I know I am new to this group but I am honestly here JUST to share this great deal with you.

Colours and Styles are AS IS, so just post:

YES

Post as above if you want in, and then I will PM you and I will give you the details of this Group Buy!

Come on guys, you definately want in on this, these dials ARE FANTASTIC, I have seen these in person!!!

This group buy will close on the 25th May, so get in quick guys, Again I stress, these dials are SOOOOO HOT, so guys GET IN, and remember just reply yes and I will PM you the details of payment!!

post-28998-1147627088.jpg

post-28998-1147627320.jpg

Edited by ro11or
Link to comment
https://www.sau.com.au/forums/topic/117844-r32-gts-t-white-dials-kit/
Share on other sites

Interested in a set for my R32 GTR 1990, will they fit? "blues ones"

How long to get posted to wa? does the 70 included postage? Also you do you install them? what do you excatley get?

cheers

DUde, he dont hae them for the GT-R for about 3 weeks, will let you know when he does!

GOOD LUCK WITH THE GB.THEY LOOK A BIT STRANGE,WHY DOES THE SMALLER DIALS NOT HAVE MORE ATTACHED FOR THE STOCK BEZEL TO CLIP INTO IT?

Hey, thanks,

When i photoshoped the dial pic and put that background on it, i accidently deleted the extra bits where they clip in, but they do come with the dials, i just photoshopped it out!

hey, i think it is BM gauges, one of the only aussie manufacturers!

why do you ask?

Did you read the rules for running a group buy?

You think its BM gauges? Who are you sourcing them through for this group buy? Im sure any prospective buyers would like to know who they are dealing with.

Did you read the rules for running a group buy?

You think its BM gauges? Who are you sourcing them through for this group buy? Im sure any prospective buyers would like to know who they are dealing with.

I'd be interested, but it looks a little odd when you join up and are selling something the same day. We've had quite a few rip off merchants of late, and while I'm more than happy to give anyone the benifit of the doubt, I think letting people know where you are located, and where you are sourcing these items could be a good idea.

I'd be interested, but it looks a little odd when you join up and are selling something the same day. We've had quite a few rip off merchants of late, and while I'm more than happy to give anyone the benifit of the doubt, I think letting people know where you are located, and where you are sourcing these items could be a good idea.

Hey, fair enuff, BM gauges supply them to RECKLESSMOTORSPORT.com.au and thats who I am getting them off, I live in Narrabeen on the Northern Beaches of sydney, I am not ripping anyone off, I am an honest person, its up to you guys to trust it or you can order them straight through www.recklessmotorsport.com.au and pay an extra $10 and completely bypass me, its up to you guys, I am sweet!!!

Thanks guys for the help

Brent

Hey, fair enuff, BM gauges supply them to RECKLESSMOTORSPORT.com.au and thats who I am getting them off, I live in Narrabeen on the Northern Beaches of sydney, I am not ripping anyone off, I am an honest person, its up to you guys to trust it or you can order them straight through www.recklessmotorsport.com.au and pay an extra $10 and completely bypass me, its up to you guys, I am sweet!!!

Thanks guys for the help

Brent

Good enough for me. I'll be ordering through you when I get home from work. I use paypal so It'll be all sweet.

Send me your details.

  • 2 weeks later...
anyone else, sold 1 so far, just post your name and email and I will send you details??/

I got the dials in the mail on friday, well packed and as advertised.

Had no problems at all.

Im interested, so u just take the dash apart and stick these ones in, even though i have the grey guages i LOVE blue ones Golf Styles....

come with instructions/warranty?

Im interested, so u just take the dash apart and stick these ones in, even though i have the grey guages i LOVE blue ones Golf Styles....

come with instructions/warranty?

yeah, I can get ya a set...

You take the gray dials out and out the white ones in, does come with instructions and a warrenty yes....

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
×
×
  • Create New...