Jump to content
SAU Community

Recommended Posts

it is a 1989 r32 gtr Gunmetal Grey with 96xxxkms on the clock and a few mods ,hks air filters,18inch mags with near new tyres ,strut brace ,gready turbo

timer, ,sony mp3 head unit .the car is in very good nic and just had a big service done about 4 to 5 mouths ago which included all the belts eg gates timing belt ect ,all the oils ,coolant spark plugs, was also replaced every thing that is needed to be done for the 100k service I got done then .also at that time I got the water

Pump replaced.also had a new clucth put in 3 weeks ago and i dont drive it to much only like 4 times a mouth on weekends.and it is always keep in a carport and looked

After and is good for its age,also I will give with the sale of the car a n1 front bar

And rear pods wich will have to be painted as I haven’t got around to getting that Done .

now whats wrong with it the rear turbo has blowen other than that the car is fine the front turbo is fine but i need to sell it has i need a car to drive to work and it is to hard to get a bus ,train ect to work so i need to sell it fast.

i am asking $15,000 neg or near that .open to offers .

feel free to call me on 0410727690

Edited by gtr2env
  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

if you need photos plase give me your email address to day cos

i cant email cos most of the weekend i wont be home ,il be at

my gfs house but if you wont to look at the car jst give me a buzz and i

can work something out cos my gfs live about 20mins from my

house.

thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...