Jump to content
SAU Community

Misc R33 Parts

RANDY
 Share

Recommended Posts

RANDY Veteran

RANDY

Posted
Posted (edited)

Hey all!

Anyone need/want a used, but good condition stock R33 intercooler? I'd be happy to take $20 for it. No plumbing, just the core. No dents, and the fins look good.

Asking $20 SOLD

I have a TurboSmart type 2 BOV that I have removed from my car, in working order. It's adjustable and can directly replace your stock BOV. Comes with Blanking button thing for your original piping.

Asking $80 SOLD

I also have a Ford EL o2 sensor, as discussed in the huge o2 sensor thread. I bought it for my R33GTST, ran it for a tank of fuel, then changed it to another brand to see if there was any difference. FAST confirmed that this part was working perfectly fine, and I have crimped the wires to a factory plug, so all you need to do is replace and plug it in.

Asking $60 SOLD

The pocket is an aftermarket one from JustJap. I didn't like it much and bought a 300zx pocket to replace this one. Fits OK.

Asking $10 SOLD

Clock was bought from another member here, and I was told that it worked fine. I bought some hazard buttons from the same person, and they work perfectly, so i'd assume this is in the same condition.

Asking $20 SOLD

Hazard lights from my car. I bought a set from someone else and replaced the globes in them, then put them in my car and removed my buttons. This set do not light up apart from the little orange light when the demister is on. I could take the time to replace the globes in this set too, but it's time-consuming.

Asking $20 SOLD

I should be able to ship any of these in an express satchel for $10, or pickup on the Northern Beaches of Sydney.

post-3573-1147761332.jpgpost-3573-1147761340.jpgpost-3573-1147761356.jpgpost-3573-1147761363.jpgpost-3573-1147761373.jpgpost-20742-1125970387.jpgpost-3573-1147761388.jpgpost-3573-1150948939.jpg[attachmen

=43320:attachment]

post-3573-1147761381.jpg

post-3573-1150948967.jpg

Edited by RANDY
Link to comment
https://www.sau.com.au/forums/topic/118084-misc-r33-parts/
Share on other sites
  • 2 weeks later...
  • 2 weeks later...
RANDY Veteran

RANDY

Posted
  • Author
Posted (edited)

Umm... hmm....

i might grab that cooler off u

I'll PM this person back, if I don't hear from them by the end of today, it's yours.

I'll PM you with my bank details, and you can reply with the shipping info.

Sound good?

Cheers!

Edited by RANDY
Link to comment
https://www.sau.com.au/forums/topic/118084-misc-r33-parts/#findComment-2279045
Share on other sites
RANDY Veteran

RANDY

Posted
  • Author
Posted

Intercooler and BOV have been shipped out.

I don't expect any problems with the BOV sent COD, but technically it's the only item pending payment.

2nd: Young GT-R $90 Tas

3rd: Josh_r33jet $65 Vic

Link to comment
https://www.sau.com.au/forums/topic/118084-misc-r33-parts/#findComment-2287198
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...