Jump to content
SAU Community

Emanage Tuners In Bris/gc

digitobi

By digitobi,
in Queensland

 Share

Recommended Posts

HOT_R33 Proficient

HOT_R33

Posted
Posted

Trackside performance spent ages with an E-manage and Profec E-01 on my car, trying to tune it and get it right, but we ended up just getting rid of it becuase the instructions are crap and anything else is in Japanese. We found the system was full of features but it was useless and didn't work. Every other shop we asked for help either haven't even used one before or have found the same problems and have ditched it as well. If you need more info on it, give Alan at Trackside performance a ring on (07)32057707 and tell him Sean sent ya, he should help you out with some info on the E-manage.

HOT_R33 Proficient

HOT_R33

Posted
Posted
WTF? They're easy to tune, I did the tune on my last car an R34 n/a with a turbo bolted on.

Provided you have the map sensor you can't go wrong, they work extremely well.

We had the E-manage and the profec E-01 with the afm and injector loom installed, and we still could not get it to fucntion at all and this was on a R33 N/A with a complete engine rebuild. The boost controller didn't work, the in built fuel cut defender didn't work and the turning capabilities, using the Greddy support tool from what we could see, were very limited when compared to a Wolf 3D or Power FC. Not only were we having these problems but everyone else we rang about it were in the same boat as us. If you have some pointers you could give us about that system I'm sure Trackside Performance and another three tuning shops would love to hear from you...

666DAN Grand Master

666DAN

Posted
Posted
We had the E-manage and the profec E-01 with the afm and injector loom installed, and we still could not get it to fucntion at all and this was on a R33 N/A with a complete engine rebuild. The boost controller didn't work, the in built fuel cut defender didn't work and the turning capabilities, using the Greddy support tool from what we could see, were very limited when compared to a Wolf 3D or Power FC. Not only were we having these problems but everyone else we rang about it were in the same boat as us. If you have some pointers you could give us about that system I'm sure Trackside Performance and another three tuning shops would love to hear from you...

np, I didn't realise there were that many people having issues with them...I basically learnt the hard way having a crash course learing how the thing worked when my car had the turbo conversion. It's a shame I still don't have it as I could have brought it down for all to see. I've never used the E-01 just the laptop interface, even with that the car just fired up first time and all adjustments through the software worked fine, ignition advancing/retarding and fuel adjustment, scaling to the boost map and the fuel cut defender was a matter of setting the max AFM voltage to just bellow the cut-out and fixing it there.

Power FC is a full replacement so sort of in a different category to a piggyback

Let me know the exact details of what issues you have and maybe I can help you guys out. The two I've seen with issues have been the wrong firmware update and a 100% faulty unit.

HOT_R33 Proficient

HOT_R33

Posted
Posted

Yeah, we must have had ones of those faulty ones then cause we did all of that and stuffed around with different afms for ages and we still couldn't gt it to work, it wouldn't even hold boost, the turbo would boost right by the set limit like it wasn't even there....

We just got sick of the whole system so we replaced it with a stand alone Wolf3D EMS.

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • R34_GT to Turbo
      Does RB25DE Neo lower intake work with RB25DET Neo Upper intake manifold?

      By R34_GT to Turbo · Posted

      Ok I get you. But isn’t the butterfly intake a headache with the +T?  see this is my plan so far but please advise me into the right direction.  Nistune Ecu, 1000cc Bosch injectors, TD05 or TD06 Kinugawa turbo using stock rb25det exhuast manifold, walbro fuel pump unsure of model I think it’s 450/460, spitfire coils and sparks to suit and a R35 MAF sensor and boost sensor.    I was thinking maybe do a cheap eBay plenum $400-500 or try find a stock det neo intake. I think I’d port match it so it’s getting the full capacity but open to advice please.  Thanks 
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • MBS206
      NC MX5

      By MBS206 · Posted

      There's a good German place in Brisbane if youre up for the drive 😛
    • Dose Pipe Sutututu
      NC MX5

      By Dose Pipe Sutututu · Posted

      The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • joshuaho96
      R33 GTR running -9 with no tune

      By joshuaho96 · Posted

      Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
×
×
  • Create New...