Jump to content
SAU Community

Recommended Posts

it stays flat. has its little jerk and then goes again but up high rpm around 6-7 you cant feel much.

i have front mount, 3 inch all the way, filter and BOV

i have a full exhaust with a shit tip from japan which came with the car.... its like an oval shape one.. pretty quiet not like a cannon..

like a stock GTR exhaust with a 4inch tip....

Sounds like the rich and retard thing.

Check out this old dyno sheet of mine. The lower line is no boost controller turned on, full exhaust, stock cooler. The upper line is 12psi of boost. See the dip in the power? It was very noticeable on the street.

post-7957-1147929277.jpg

I dont get it.... Adam... you got only 100 RWKW on stock boost?! how is that possible?!?! and only ~150rwkw on 18-19 PSI?

I used to run around 12PSI on that pheunamatical mehcnaical boost controller from SidMark on a stock exhaust and EManage. Was I restricting the power?

yeah thats it...

same as you abo bob....

thats how i feel but you can feel it bigtime on the streets....

heard it was rich too... but man i cant see from the rear mirror....

so if i was to boost my car to 12psi cooler full exhaust filter...

how much you think i can push?

or how much does everyone else push?

Edited by ZERO

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...