Jump to content
SAU Community

Recommended Posts

mmm busted springs & shattered pistons :happy:

If you balance it properly that wont happen....however if you do what sub-zero did and rev it to 11,000 in the burnout you will end up with a leg out of bed

mmm busted springs & shattered pistons :happy:

All depends on what it is built for :)

change it :P

u could sell them gtr seats for ~$1200 and that'd be half less ud have to pay for ur brides!!!

No more money spent, plus selling stuff is gay because most people are heaps annoying

RACE IT!! :)

You saw the pictures right?:P

If you balance it properly that wont happen....however if you do what sub-zero did and rev it to 11,000 in the burnout you will end up with a leg out of bed

the stock valvetrain won't like revving all that hard though, i remember a supra with an upgraded valvetrain experiencing valve float at 10,000rpm, so they then went to double-springs and had no more troubles...and yes, how stupid must one be to do that lol

I used to get 290rwkw at 1bar..it was a little laggy though coming on around the 3800 - 4000rpm range. Thats the problem with high singles though, cams helped but yea. Still thats what made it so fun, I trust you have the same fun in your car.

whoa thats heaps hey! makes my 160 seem PUNY

lol

(although ive only spent 13,250 which is why)

Guess how much I have spent....you will hate me

Your car is primarily set up for track so I took it as much thats what you would be focused on. Dont suppose you have a 1/4 time? How long have you owned that car?

nah no quarter mile time yet, I have had it since Feb this year....and been replacing stuff and trying to get ti to run properly since July :happy: lol

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
    • Does the scanner do all the CUs in the car, or only the ECU?
    • @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
×
×
  • Create New...