Jump to content
SAU Community

Recommended Posts

Wow sambo on the left looks like he is having a great time

Morning all

let the wang pic die!

too bad its a ghey SR in there :P

TEAM GHEY? :)

morning whorebags & toerags :wave:

I'm glad I stuck to my guns and went with the sr

But i will miss the nice note of my old rb :)

She perfers not to have an extra 150kgs hanging over the front axle

with only 1100kg to pull (Stripped out) the SR will have more than enough power for her needs and have better bottom end than most RBs anyway!

Morning

yup.. and the vct means the top end ain't exactly shameful either.

And they'll be too small!!!! :P:)

500hp will do until march :wave:

Ang on

What are the turbos that were on it when I was there the other day?

they were std R34 turbos (ball bearing but ceramic wheels)

these turbos i just bought form a mate at work, are from an R34 NUR (ball bearing, steel wheels & shaft), and have ~100km's on them (yes u heard right) , also bought the HKS dumps that are on them aswell :)

500hp will do until march :wave:

they were std R34 turbos (ball bearing but ceramic wheels)

these turbos i just bought form a mate at work, are from an R34 NUR (ball bearing, steel wheels & shaft), and have ~100km's on them (yes u heard right) , also bought the HKS dumps that are on them aswell :)

Why not sell both sets and buy somthing good now?

Why not sell both sets and buy somthing good now?

caus with the next set i'm doing headwork & cams aswell (to match the turbo's), which will cost a fair bit, plus im not 100% sure what i want to set the car up for

I think i might keep my 31 and put it in the shed for a while......Then do to it what i always wanted to.....rb 26/30 with 600hp BB turbo 25 box and shitloads of rear tyres :wave:

and 20k later ud have a real weapon! :)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...