Jump to content
SAU Community

Recommended Posts

whores, whats sup. i havent seen that bogan vid for ages , still funny as. :nyaanyaa: went and did a bit of shopping today,my mum told me they had 20% off at supercheap so i went and got some stuff and they chick didnt give me a discount, i wasnt happy at all. but i didnt see any catalogues or anything saying 20% off so i dont know mite have only been on selected things or something....

Yeah man, coming up. Apparently my mate was at moffats today, said it went off!

yeah cool as. its gonna be cold i reckon. but u wont feel it when u start skimming. when u going away to where ever u were going skimming at?

ha ha just for fun look at this random vid lol

Edited by 85URK
LoL thats pretty random man!

And skimdulgence is in October normally. So I gotta find a full body wetsuit before then. Cause down there is REALLY cold.

yeah, u will find one, im sure. i can just imagine how cold it would be.

well im out to bed, hope its doesnt rain 2moro then il maybe start polishing my car.... but i doubt it. mite see u round while u up here.

work utes are fun! especially when sponsored laurel's are looking at you funny because your drifting (by accident) next to them on the highway at 100kph :nyaanyaa: this was purely by accident i assure you. the roundabout wasnt :laugh: and the best part. i dont have to pay for any of it! yay for me!

mornin mike :nyaanyaa:

i just got back from bundy i went up there for a few days to spend xmas with my g/fs parents - they have a cane farm..soo quiet out there wierd to be back in the ratrace lol

hope everyone had a great xmas :laugh:

mornin isaac. did you have fun in the cane farm *nudge nudge*

oh thanks for letting me borrow your lawyer *hands back aluminium bat*

ooohhh hot chickie outside. distractions. sometimes i love my job :nyaanyaa:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...